A skinny table lamp is a narrow, column-shaped light that takes up very little surface area while still delivering a focused pool of illumination. This one from MINIHOUZZ does it with a slendered cylindrical body, a round base, and an integrated 5W LED that runs on AC 110-240V. It stands 38cm (14.9 inches) tall with a 17cm (6.6 inch) diameter footprint, weighs 3kg, and uses a simple push button switch. It is not dimmable, and it is rated IP20 for indoor use only.
If you are choosing between a skinny lamp and a conventional shaded table lamp, the decision usually comes down to footprint and light behaviour: this design gives you a contained, downward-facing glow from a small base rather than a broad ambient wash from a fabric shade. That makes it a strong fit for narrow nightstands, console tops, and desks where surface space is contested.
Design and materials
The body is metal with aluminum elements, cut and sanded before finishing. Four finishes are offered: Black, White, Sand nickel, and Gold. Each one changes the personality of the lamp considerably at close range.
- Black — reads as graphic and architectural; disappears against dark walls and grounds pale ones.
- White — blends into light plaster and trim, keeping the silhouette soft rather than sculptural.
- Sand nickel — a muted, brushed metallic that sits between warm and cool; the safest choice if you are matching mixed metals.
- Gold — the most decorative of the four; best used as a deliberate accent against matte or dark surfaces.
The light source is integrated, which means there is no bulb to source and no exposed socket to accommodate. The description notes the lamp includes a 150cm / 59 inch cord with a switch socket. Because the LED is built in, the fixture’s lifespan is the lifespan of that module — treat it as a sealed unit rather than something you will re-lamp later.
Where it works, and how high to place it
At 38cm tall, this lamp is a small object. Its natural jobs are bedside, desk, and sideboard duty. The placement rules below are starting points rather than fixed law — adjust to how you actually sit and read.
Bedside
For reading in bed, you want the light source roughly at or just below eye level when you are propped up, so the glare does not hit you directly. On a typical 55-65cm nightstand, this 38cm lamp puts the illuminated column at about 93-103cm above the floor — a sensible band for most adults. If your nightstand is lower than 50cm, the lamp will sit below shoulder height and read more as accent light than task light.
Keep at least 15-20cm of clear space between the lamp and the edge of the mattress so the column is not knocked during the night. With a 17cm base, a nightstand depth of 35cm or more leaves comfortable margin.
Desk
As a desk accent this lamp is better suited to framing a workspace than lighting paperwork. Place it at the back corner of the desk, on the opposite side from your writing hand, so the column does not cast a shadow across your working area. If you need genuine task lighting for long sessions, pair it with a dedicated task lamp rather than relying on this one alone.
Sideboard and console
On a hallway console or dining sideboard, skinny lamps work in pairs or threes. A practical guideline is to space them 40-60cm apart for a rhythmic look, or place a single lamp off-centre at roughly one third of the console length for a less symmetrical composition. On a console behind a sofa, keep the top of the lamp below the sightline of anyone seated nearby so it does not interrupt conversation.
Choosing a colour temperature
The integrated LED is offered in three colour temperatures. The right pick depends on the room and the hour you use it most.
- Warm White (3000K) — the default for bedrooms and living rooms. Warm enough to feel like evening light, clean enough to read by.
- Daylight (4000K) — neutral and slightly crisp. A good middle ground for desks, dressing tables, and rooms that serve more than one purpose.
- Cool White (6000K) — noticeably blue-white. Best reserved for utility areas, detailed work, or rooms with a lot of cool grey and chrome where warmer light would clash.
One thing to plan around: the lamp is not dimmable and the colour temperature is fixed at the point of order. If you want a bedroom light that can drop low for late evenings, this fixture will not do that — it delivers a constant output. Choose the colour temperature you want for the majority of your usage, not for a single occasion.
Specifications
| Dimensions | Diameter 17cm x Height 38cm (6.6 in x 14.9 in) |
|---|---|
| Weight | 3kg / 6.6 lbs |
| Material | Metal, Aluminum |
| Light source | Integrated LED, approx. 5W |
| Colour temperature | 3000K warm white, 4000K daylight, 6000K cool white |
| Voltage | AC 110-240V |
| Control | Push button switch, not dimmable |
| Cord | 150cm / 59 in with switch socket |
| Driver required | No |
| Rating | IP20, indoor use only |
| Finishes | Black, White, Sand nickel, Gold |
| Compliance | UL Certified, ETL Listed, CE Approved, RoHS Compliant, FCC Certified |
Is it the right lamp for your room?
Use this short checklist before ordering.
- Yes if your surface is narrow and you want light without visual bulk.
- Yes if you want a fixed-output accent light with no bulb maintenance.
- Yes if you are lighting a bedroom, living area, hallway console, or desk corner indoors.
- No if you need dimming for a wind-down routine — this fixture is push button only.
- No if the lamp will sit outdoors, in a bathroom, or anywhere damp — IP20 rules that out.
- No if you need a large ambient wash from a fabric shade; a column LED is a focused, local light.
Practical notes before you install
Check your outlet position first. With a 150cm cord, the lamp needs to be within reach of a socket or an extension lead — plan the cable route so it drops behind the furniture rather than across a walkway. At 3kg the lamp is stable on a level surface, but on a glass or high-gloss top consider a thin felt pad under the base to avoid scratching.
Because there is no driver to house and no bulb to change, setup is essentially: place, plug in, press the switch. Keep the column clear of soft furnishings and curtains, and avoid enclosing it in a tight shelf cubby where heat has nowhere to go.
Frequently asked questions
Is this skinny table lamp dimmable?
No. It uses a push button switch and is not dimmable. Output is constant when switched on.
Which colour temperature should I choose?
3000K warm white for bedrooms and living rooms, 4000K daylight for desks and multi-use rooms, 6000K cool white for utility spaces or rooms with cool-toned finishes. The choice is fixed at order.
Can I use it outdoors or in a bathroom?
No. The lamp is rated IP20 and is intended for indoor use only. It is not suitable for outdoor or damp environments.
Does it need a bulb or a driver?
Neither. The LED is integrated and no driver is required. There is no bulb to replace.
Will it work with US mains voltage?
Yes. The lamp is rated AC 110-240V, so it covers standard US 120V supply as well as 220-240V regions. It ships with a 150cm / 59 inch cord and switch socket.
Ready to pick a finish? See the skinny table lamp in Black, White, Sand nickel and Gold, and check the current price and availability on the product page. If you need custom dimensions or lighting layout advice, the MiniHouzz design team can help — start with the product page.