The MiniHouzz Lotus Leaf is a flush mount ceiling light with an integrated LED, a hydrographic wood-grain finish, and a silhouette shaped like a lotus leaf with gently curled edges. It is built for rooms where you want warm, wood-toned light without dropping a pendant into the space — bedrooms, hallways, bathrooms, kitchens, and covered outdoor areas. It comes in two wood finishes and six sizes, from an 11.8 in (30 cm) round fixture up to a 53.1 × 33.5 in (135 × 85 cm) rectangular panel.
If your question is simply “what is this, and where does it go,” the short answer: it is an indoor, hardwired, damp-rated ceiling fixture with a fixed LED, and it is best matched to a normal-to-low ceiling where headroom matters. You can see all sizes and finishes here →
Design and Materials
The fixture pairs a metal body with an acrylic diffuser over an integrated LED array. The leaf structure is produced with hydrographic printing, which is how the two finishes get their depth:
- Hydrographic walnut wood grain — a richer, darker, earthy wood tone.
- Hydrographic natural wood grain — a lighter, pale timber tone.
Both finishes are printed onto the metal body, so the wood look stays consistent across the surface rather than varying piece to piece. The shade itself is white, which keeps the output clean and neutral once the fixture is switched on. The lotus-leaf edge curls upward slightly — a detail that gives the fixture depth and reads as intentional from below, which is how you actually see a ceiling light from.
The light source is a fully integrated LED. MiniHouzz states that it cannot be replaced: the LEDs are built into the fixture. That is worth knowing before you buy — no bulb shopping, but also the fixture’s life is the fixture’s life.
Where It Works: Rooms, Ceilings, and Installation
As a flush mount, the fixture sits almost flat against the ceiling — the round versions are only 1.6 in (4 cm) deep, and the rectangular versions are 2.4 in (6 cm) deep. That shallow profile is the main reason to choose it over a pendant or chandelier in rooms with standard or low ceilings.
Practical placement, assuming a typical 8–9 ft ceiling:
- Bedrooms: the 15.7 in (40 cm) or 20.5 in (52 cm) round is a good general-light size; center it in the room. Pair it with a 3000K color temperature if you want the room to feel warm at night.
- Hallways: use one size smaller than the room feels like it “needs” and, on a long corridor, space multiple fixtures so the pools of light overlap rather than leaving dark gaps between them.
- Bathrooms and kitchens: the fixture is IP 20 damp-rated, so bathroom and kitchen placement is fine. In a narrow bathroom, offset it slightly toward the mirror rather than centering it, so it lights the vanity instead of landing behind your head.
- Covered outdoor areas: damp-rated placement extends to covered outdoor areas; this is not a wet-location fixture, so keep it under a roof.
On color temperature, the fixture is offered in 3000K warm, 4000K neutral, and 6000K cool. If in doubt: warmer for bedrooms and living areas, neutral for kitchens and workspaces, cooler for utility rooms and garages.
Because the fixture is hardwired and designed to run from a common wall switch (not included), plan for a switched ceiling box as you would for any flush mount. It is rated for AC 110–240V, so it is not voltage-specific within that range.
Sizes: Round or Rectangular
MiniHouzz offers four round sizes and two rectangular panels. The round sizes suit rooms with a central focal point; the rectangles suit long, narrow spaces where a single round fixture would look undersized. Browse the full size range →
| Shape | Size | Best suited to |
|---|---|---|
| Round | ∅ 11.8 in (30 cm) | Small closets, powder rooms, tight hallways |
| Round | ∅ 15.7 in (40 cm) | Small bedrooms, bathrooms, entryways |
| Round | ∅ 20.5 in (52 cm) | Medium bedrooms, larger bathrooms, kitchens |
| Round | ∅ 28.3 in (72 cm) | Large bedrooms, open living areas, dining nooks |
| Rectangular | 39.4 × 23.6 in (100 × 60 cm) | Long hallways, narrow kitchens, corridors |
| Rectangular | 53.1 × 33.5 in (135 × 85 cm) | Large rooms, open-plan spaces, long corridors |
A common rule of thumb for a round general-light fixture: add the room’s length and width in feet and aim for a diameter roughly equal to that total in inches. For a 12 × 12 ft bedroom, that points toward the 20.5 in (52 cm) or 28.3 in (72 cm) round.
Specifications
| Spec | Detail |
|---|---|
| Light source | Integrated LED (not replaceable) |
| Color temperature | 3000K warm / 4000K neutral / 6000K cool |
| Voltage | AC 110–240V |
| Body finishes | Hydrographic walnut wood grain; hydrographic natural wood grain |
| Shade finish | White |
| Materials | Metal, acrylic |
| Mounting | Ceiling, flush mount |
| Moisture rating | IP 20, damp-rated (bathrooms, kitchens, covered outdoor areas) |
| Environment | Indoor |
| Wiring | Hardwired |
| Control | Common wall switch (switch not included) |
| Certifications | UL Certified, ETL Listed, CE Approved, RoHS Compliant, FCC Certified; UL, ETL, CE, and SAA listed |
What to Check Before You Order
- Ceiling height. Flush mount is the right call for 8 ft ceilings or lower; the whole point is that it does not hang into the room.
- Room shape. Square-ish room → round. Long and narrow → rectangular.
- Finish. Walnut if your room leans warm and darker; natural wood if it leans light and Scandinavian.
- Color temperature. Decide up front — this is the one choice you cannot change later, since the LED is integrated.
- Switch wiring. Confirm a switched ceiling box exists; the fixture needs hardwired power and does not include a switch.
FAQ
Can this light be used in a bathroom?
Yes. It is IP 20 damp-rated, and MiniHouzz lists bathrooms, kitchens, and covered outdoor areas as suitable placements. It is not a wet-location fixture, so keep direct water spray away from it.
Is the LED light source replaceable?
No. The integrated LED is fully built into the fixture and cannot be replaced.
What color temperatures are available?
Warm light (3000K), neutral light (4000K), and cool light (6000K).
Does it need a special switch or dimmer?
No special switch is required — it is designed to work with a common wall switch, which is not included. The fixture is hardwired.
Are there certifications?
Yes. MiniHouzz lists the fixture as UL Certified, ETL Listed, CE Approved, RoHS Compliant, and FCC Certified, and as UL, ETL, CE, and SAA listed.
Bottom Line
The Lotus Leaf flush mount is for the room where a pendant would be wrong: a bedroom with a low ceiling, a hallway you light from above, a bathroom that needs a clean, warm glow. Choose the round or rectangular size to match the room’s proportions, pick walnut or natural wood grain to match the palette, and lock in 3000K, 4000K, or 6000K before you order — because the LED is built to stay.
See the Lotus Leaf flush mount ceiling light in every size and finish →