A flush mount ceiling light is the right answer when you want the presence of a pendant without giving up headroom. This one — the Oscar from MiniHouzz — is a 19.7-inch iron-and-glass fixture with an integrated LED module rated at roughly 24W. It sits just 9.8 inches deep, so it drops only a short distance below the ceiling while still reading as a designed object rather than a builder-grade dome. It suits bedrooms, hallways, entryways, and any room where the ceiling is eight or nine feet and a hanging fixture would feel like an obstacle.
Below: what it is actually made of, how to size and place it, the specifications as listed, and the questions buyers ask before ordering.
Design and Materials: Iron Frame, Glass Shade
The construction is deliberately simple. An iron body carries a glass lampshade, and the pairing is what gives the fixture its character: iron supplies the structure and the crisp silhouette, glass softens what would otherwise be a hard-edged disc of metal. Because the light source is integrated behind the glass rather than exposed in a socket, the shade acts as a diffuser — you get an even, low-glare face instead of a visible bulb.
One detail worth knowing before it surprises you: the metal canopy has a naturally textured finish, with slight variations in tone and pattern. That is intentional, not a defect — each fixture carries small differences in the surface. If you are ordering two or three for a hallway run, expect them to be siblings rather than identical twins.
The finish options are Gold, White, and Nickel. Gold reads warm and decorative and works best against white ceilings and warm-neutral walls. White disappears into the ceiling — the right call for a hallway where you want light, not hardware. Nickel sits between the two and matches most modern plumbing and door hardware, which is why it is often the safest choice in a resale-minded renovation.
Sizing and Placement: Where a 19.7-Inch Flush Mount Fits
A common rule of thumb for ceiling fixtures: add the room’s width and length in feet, and treat that number as the ideal diameter in inches. Nineteen point seven inches maps to a room roughly 10 by 10 feet — a standard bedroom, a generous entry, or a hallway bay. Much larger and the fixture starts to look undersized; much smaller and it crowds the ceiling.
Bedrooms
Centered on the room is the default and usually correct position. In a primary bedroom, a 19.7-inch flush mount delivers general illumination without casting a shadow line across the bed the way a directional pendant can. If the room has a ceiling fan junction already wired, this fixture is a direct swap in most cases — confirm the junction box is rated for the load and that the canopy covers the existing opening.
Hallways and Entryways
Hallways benefit from repetition more than size. Space fixtures evenly — roughly 8 to 10 feet apart in a long corridor, with the first unit about that distance from each end wall, so the run reads as a rhythm rather than a random cluster. In a two-story foyer, keep a flush mount on the upper ceiling and let the lower level stay open; the low profile keeps sightlines clean from the stair landing.
Kitchens, Offices, and Small Utility Rooms
Anywhere you stand and work under the fixture, the 9.8-inch drop matters. Over a kitchen island, a flush mount gives even task light without hanging into eyeline; the trade-off is that it lights the whole room rather than the countertop specifically, so pair it with under-cabinet lighting if the counter is the work surface.
Installation Notes: Clearance, Height, and Ceiling Type
The number that decides whether this fixture is comfortable is clearance, not style. The fixture is 9.8 inches deep. On an 8-foot ceiling (96 inches), the bottom of the lamp lands around 86 inches off the floor — about 7 feet 2 inches. On a 9-foot ceiling you are near 8 feet 2 inches. Both clear a doorway and both clear a person walking underneath, which is why flush mounts are the standard answer for corridors and closets where a pendant would be a hazard.
- Clearance rule: keep at least 80 inches (6 ft 8 in) of clear space below any ceiling fixture in a walkway. This one clears that comfortably on standard residential ceilings.
- Junction box: the fixture mounts to a ceiling box; the canopy needs to sit flat against the ceiling surface, so check for a box that is flush rather than recessed behind drywall.
- Ceiling type: flat drywall is straightforward. Sloped ceilings need a matching canopy angle — confirm before ordering rather than after.
- Dimmer: the LED module is integrated, so dimming depends on the driver and switch combination. If dimming matters for your room, ask support to confirm compatibility with your switch before purchase. Do not assume it.
- Color temperature: because the LED is built in, the color temperature is fixed at the factory. Confirm the exact figure with MiniHouzz if you are matching it to an existing lighting scheme — mixing a warm hallway with a cool one is the most common regret in whole-home lighting projects.
Specifications
| Spec | Detail |
|---|---|
| Diameter | 50 cm / 19.7 in |
| Height | 25 cm / 9.8 in |
| Light source | Integrated LED, approximately 24W |
| Materials | Iron lamp body, glass lampshade |
| Finishes | Gold, White, Nickel |
| Mounting | Ceiling, flush mount with metal canopy |
| Compliance stated by the listing | UL Certified, ETL Listed, CE Approved, RoHS Compliant, FCC Certified |
| Style | Scandinavian, contemporary |
Two practical notes on the numbers. First, dimensions from hand-measured production runs can vary slightly, so do not design a tight recess around the exact figure — leave a small tolerance. Second, the 24W rating describes the module’s power draw; the listing does not state lumen output or color temperature, so request those figures from support if you are building a room-by-room lighting plan.
Choosing Between Gold, White, and Nickel
- Gold — warm, decorative, best in bedrooms and living spaces with brass or warm wood accents. Reads as jewelry on a white ceiling.
- White — visually recedes. The right pick for hallways, rental units, and anywhere the light should do the work and the fixture should not draw attention.
- Nickel — neutral, matches most modern hardware, ages well against gray and cool-neutral palettes. The most flexible choice across a whole house.
Before You Order: A Five-Point Checklist
- Add the room’s width and length in feet — is the sum near 20? If yes, the 19.7-inch size is proportional.
- Measure ceiling height. Under 9 feet, a flush mount is almost always the better call than a pendant.
- Check the junction box is flush with the ceiling surface and rated for a ceiling fixture.
- Decide whether you need dimming, and confirm driver/switch compatibility with support first.
- Order all units for one sightline at the same time, and expect minor finish variation — the canopy texture is intentionally non-uniform.
FAQ
What are the exact dimensions?
50 cm diameter by 25 cm height, which is 19.7 inches by 9.8 inches. The fixture is a flush mount, so total depth below the ceiling is that same 9.8 inches.
What is it made of?
An iron lamp body with a glass lampshade. The iron provides the structure and the canopy; the glass diffuses the integrated LED behind it.
Does it take bulbs?
No. The light source is an integrated LED module rated at approximately 24W. There are no replaceable bulbs, so the LED’s output characteristics are set when the fixture is built.
Which finish should I choose for a hallway?
White, if you want the fixture to recede into the ceiling, or Nickel if your door hardware and trim are brushed metal. Gold is the more decorative choice and works better in a bedroom or entry where the fixture is meant to be noticed.
Can it go in a bathroom or a damp space?
The listing does not state a damp or wet location rating, so treat it as a dry-location fixture unless MiniHouzz confirms otherwise for your specific unit. Ask before installing over a shower or in a humid zone.
Can I use it on a sloped ceiling?
It is designed for a flat ceiling with a canopy that sits flush to the surface. A sloped ceiling needs a matching canopy angle — confirm with support rather than forcing the mount.
The Short Version
The Oscar is a 19.7-inch iron-and-glass flush mount with a 24W integrated LED, a 9.8-inch drop, and three finish options. It fits rooms around 10 by 10 feet, clears headroom on standard ceilings, and is the sensible alternative to a pendant in bedrooms, hallways, and entries. Confirm dimming compatibility and color temperature with support if either matters to your project, and expect slight intentional variation in the canopy finish.