The MiniHouzz brass wall lamp is a vintage-inspired wall sconce built around a single MR16 LED socket. Its purpose is focused: cast warm, directional light exactly where a task happens — over a bathroom vanity, above a kitchen counter, or beside open shelving — while adding the aged-brass character that flat LED strip lighting tends to miss. It comes in one- to five-head versions, so the fixture can be matched to the length of the wall rather than the other way around.
Design and Materials
The body of the fixture is made from brass, which gives it a warm, softly reflective finish and the classic silhouette associated with period and vintage interiors. The look is deliberately restrained: curved metalwork, exposed hardware, and a profile that reads as an accent rather than a statement piece. That makes it easy to place alongside farmhouse, traditional, or transitional decor without clashing.
At the heart of each head is an MR16 LED socket. Note that bulbs are not included, so you choose the beam and tone you want. The fixture is rated for AC 110V and is listed as compliant with a broad set of safety and environmental standards: UL Certified, ETL Listed, CE Approved, RoHS Compliant, and FCC Certified.
How Many Heads Do You Need?
The multi-head variants are the practical choice for wider walls. Each head adds roughly 5W of load, and the length grows in even increments, so the decision usually comes down to how much wall you are lighting.
| Configuration | Length | Height | Approx. Power |
|---|---|---|---|
| 1 head | 11.5 cm / 4.5″ | 13 cm / 5.1″ | ~5W |
| 2 heads | 35 cm / 13.8″ | 12 cm / 4.7″ | ~10W |
| 3 heads | 54 cm / 21.3″ | 12 cm / 4.7″ | ~15W |
| 4 heads | 73 cm / 28.7″ | 12 cm / 4.7″ | ~20W |
| 5 heads | 93 cm / 36.6″ | 12 cm / 4.7″ | ~25W |
Measure the width of the wall or mirror you are working with, then leave a reasonable margin on each side rather than matching the fixture to the full span. As a rule of thumb, the single-head version suits a tight spot or a stacked pair beside a mirror; the three- to five-head versions suit a long vanity or a counter that runs the width of the kitchen.
Where to Install It
Because the heads are directional, this sconce works best where the light needs to land on a surface rather than fill an entire room.
Bathroom Vanity
A single head or a pair flanking a mirror is the classic vanity arrangement. Sidelight placement — one fixture at each side of the mirror at roughly eye level, so the light falls evenly across the face — tends to be more flattering than a fixture mounted directly overhead. For a wider double-sink vanity, a multi-head bar above the mirror is a common alternative. Because the fixture is listed for indoor use and the description confirms it is suitable for bathroom vanities, it fits the space; just keep electrical work to a licensed electrician and confirm placement with your local code.
Kitchen Counter
Mounted above a counter, the lamp acts as a focused task light for prep and plating. In practice, many installers set the fixture so the heads sit roughly 30–36 inches above the countertop and angle them slightly outward, keeping the beam on the work surface and glare out of your eyes. The distance is a guideline, not a rule — adjust it to your ceiling height and how you actually use the counter.
Shelving, Entryways, and Bedside
Over open shelving, a multi-head bar can light a display of objects or books. Near an entry or foyer, it adds a functional pool of light at a console. Beside a bed, a single head gives a reading light that does not demand a table — useful in small rooms.
Bulbs and Color Temperature
The fixture uses an MR16 LED socket and the bulbs are sold separately, which gives you control over the two things that change the feel of a room most: beam and color temperature.
- Warm (2700K–3000K): a good default for bedrooms, entryways, and living spaces, where the goal is atmosphere.
- Neutral to slightly brighter (3000K–3500K): often preferred for bathroom vanities and kitchen counters, where accurate color and visibility matter more.
- Beam angle: narrower beams concentrate light on a surface; wider beams spread it. For task surfaces, a directional MR16 LED is usually the better fit.
- Output: the listed figures (~5W per head) describe the fixture’s load, not a fixed brightness. Match the bulb you install to the look and light level you want.
If you want dimming, choose an MR16 LED bulb rated for dimming and pair it with a compatible dimmer — dimming behavior follows the bulb and the dimmer, so check both before you commit.
Specifications
| Material | Brass fixture body |
|---|---|
| Socket | MR16 LED socket (bulbs not included) |
| Voltage | AC 110V |
| Configurations | 1, 2, 3, 4, and 5 heads |
| Approx. Power | ~5W per head |
| Compliance | UL Certified · ETL Listed · CE Approved · RoHS Compliant · FCC Certified |
Dimensions may have slight manual measurement variations. Colors and color temperatures may vary slightly due to photography lighting, monitor displays, and batch differences.
Frequently Asked Questions
What type of bulb does this lamp use?
It uses an MR16 LED socket. Bulbs are not included, so the bulb is purchased separately.
What are the dimensions of each head configuration?
The 1-head version measures L 11.5 cm × H 13 cm (4.5″ × 5.1″); 2 heads is L 35 cm × H 12 cm (13.8″ × 4.7″); 3 heads is L 54 cm × H 12 cm (21.3″ × 4.7″); 4 heads is L 73 cm × H 12 cm (28.7″ × 4.7″); and 5 heads is L 93 cm × H 12 cm (36.6″ × 4.7″).
Can I use this lamp in a bathroom or kitchen?
Yes. It is described as suitable for mounting over shelving, bathroom vanities, and kitchen counters, and it provides focused, characterful light in each of those settings.
Do you offer expedited shipping?
Yes — expedited shipping is available for an additional fee. Contact MiniHouzz support for details and arrangements.
Why This Brass Sconce Works
Most wall lighting forces a compromise: practical but plain, or beautiful but dim. This fixture leans on a genuine material — brass — and a directional MR16 LED socket to do both jobs at once. It is a sensible choice if you want a bathroom vanity, kitchen counter, or shelving area to look intentional, and you would rather choose your own bulb than inherit one.
Pick the head count to suit your wall, choose a bulb for the task at hand, and let the brass do the rest. See the brass wall lamp and available configurations →