A 17.3-inch (44 cm) resin flush mount ceiling light is the middle size in most residential lighting plans: wide enough to light a bedroom or a small living room on its own, shallow enough at 3.5 inches (9 cm) to sit close to the ceiling without stealing headroom. This one pairs a moulded resin body with an acrylic diffuser and an integrated LED module available in 3000K, 4500K or 6000K, in white, green or beige.
Two specs decide whether it works for you, and it is worth knowing them before anything else: the fixture is not dimmable, and it carries an IP20 rating, which means dry indoor locations only — no bathrooms, no laundry rooms, no covered porches. If either of those is a dealbreaker, stop here. If not, the rest of this guide covers how the materials behave, how to choose the color temperature, and where a 44 cm flush mount actually belongs.
What the resin-and-acrylic build means in practice
The body is resin, finished by spray paint after moulding and cutting. Resin is the reason this fixture can hold a soft, rounded Scandinavian silhouette at a comparatively light 3 kg (6.6 lbs) — a comparable ceramic or cast-metal body of the same diameter would be heavier and would need sturdier ceiling anchoring. The trade-off is that resin is a composite, not a metal: it tolerates normal indoor humidity but should not be expected to handle steam or splashing, which is consistent with the IP20 rating.
The diffuser is acrylic, and that is the part you actually look at. Acrylic spreads the output of the integrated LED across the full 17.3-inch face instead of letting a hot spot bloom in the middle, which is why the manufacturer describes the light as shadow-minimizing and easy on the eyes. In a bedroom or a home office where you glance up from a screen, a diffused face matters more than raw output.
Three finishes are offered — white, green and beige. White disappears against a standard ceiling and is the safe default for resale-friendly interiors. Beige reads warmer and softer against off-white plaster and wood trim. Green is the deliberate choice: it works best as the single accent in an otherwise neutral room rather than repeated across a whole hallway.
Choosing between 3000K, 4500K and 6000K
The integrated LED ships with three color temperature options, and this is the single decision that most changes how the room feels. As a working rule:
- 3000K (warm) — bedrooms, reading corners, dining areas, and any room where the light is on in the evening. It keeps skin tones and wood finishes looking natural.
- 4500K (neutral) — the most flexible option. Good for living rooms that double as work spaces, kitchens adjacent to living areas, and rental units where you cannot predict how the room will be used.
- 6000K (cool) — closets, utility corridors, home offices and task-heavy spaces. Crisper contrast, but in a bedroom at night it reads clinical.
One caution on mixing: if a hallway has three of these and one is set to 6000K while the others run 3000K, the odd one out is immediately obvious. Set every fixture in a sightline to the same color temperature before installation, not after.
Where a 44 cm flush mount fits, room by room
Bedrooms
A 17.3-inch diameter is a sensible single-light solution for a primary bedroom up to roughly 12 x 12 ft, and generous for a guest room. Center it on the room, not on the bed — centering on the bed looks correct only until furniture moves. At 3.5 inches of drop it clears wardrobe doors and ceiling fans comfortably.
Living rooms and open-plan areas
In a small living room or a seating zone within an open plan, one 44 cm fixture works as ambient light over the conversation area while floor and table lamps carry the task load. In a large open plan, plan on a row of two or three rather than one larger fixture — a single 17.3-inch light in a 20-foot room leaves visible dark corners, and the flush profile makes multiples read as a deliberate rhythm rather than clutter.
As a starting point for spacing multiples, many designers use roughly 1.5 times the ceiling height in feet as center-to-center distance, then adjust for furniture layout. Treat that as a first pass to mark on the ceiling with tape, not a final answer.
Closets, hallways and home offices
This is where the flush profile earns its keep. In a walk-in closet, the 3.5-inch drop clears shelving returns and hanging rods. In a hallway, spacing fixtures evenly along the run is more comfortable than pooling light at one end. In a home office, set the fixture slightly in front of the desk rather than directly overhead so the diffused face is not in your field of view all day — and choose 4500K or 6000K if the room is used for detail work during daylight hours.
Where it should not go
Not in a bathroom, shower room, laundry room, or any damp or wet location — IP20 rules those out. Not outdoors or on a covered porch, even under a roof. And because it is push-button on/off only, it is the wrong fixture for a room where you want scene control or dimming for movie nights; plan a dimmable alternative there instead of trying to add a dimmer downstream.
Specifications
| Spec | Detail |
|---|---|
| Dimensions | Dia 44 cm x H 9 cm / 17.3 in x 3.5 in |
| Light source | Integrated LED, no bulb required |
| Color temperature | 3000K warm / 4500K neutral / 6000K cool |
| Voltage | AC 110-240V |
| Mounting | Ceiling, flush |
| Materials | Resin body, acrylic diffuser |
| Finish process | Spray paint, mould, cutting |
| Finishes | White, green, beige |
| Control | Push-button switch, not dimmable |
| Driver | Included / required: yes |
| Weight | 3 kg / 6.6 lbs |
| IP rating | IP20, dry indoor locations |
| Certification | UL Certified, ETL Listed, CE Approved, RoHS Compliant, FCC Certified |
The listing quotes wattage in two places (24 W alongside the size line and 10 W in the specification notes). If you need an exact figure for circuit load or an energy calculation, confirm it with MiniHouzz support before ordering rather than relying on this page. Lumen output and CRI are not published in the product data, so this guide makes no claims about them.
Flush mount vs semi-flush vs pendant: a quick comparison
| Type | Drop below ceiling | Best for | Watch out for |
|---|---|---|---|
| Flush mount (this fixture) | ~3.5 in / 9 cm | Low ceilings, bedrooms, closets, hallways, circulation space | Little visual drama; not dimmable in this model |
| Semi-flush | ~8-14 in | Standard 8-9 ft ceilings, dining nooks | Can crowd door swings in tight rooms |
| Pendant | 18 in and up | Islands, dining tables, stairwells | Needs ceiling height and a defined furniture anchor |
If the ceiling is under 8 ft, flush mount is usually the correct family. If it is 9 ft or more and there is a table underneath, a pendant earns the space better.
Installation notes worth reading before you buy
- Voltage: rated AC 110-240V, so it is compatible with standard North American 120V household circuits. Installation should be done by a qualified electrician, particularly where a new ceiling box is needed.
- Ceiling box capacity: at 3 kg / 6.6 lbs the fixture is light, but the box must still be rated for a ceiling luminaire. In older homes, verify the box rather than assuming.
- Switching: the fixture is controlled by a push-button switch with on/off only. If the wall already has a dimmer, replace it with a standard switch — do not leave a dimmer in circuit ahead of a non-dimmable driver.
- Color temperature setting: set it at installation. Changing it later means going back up a ladder.
- Clearance: check closet shelving and cabinet doors against the 9 cm drop before drilling.
Frequently asked questions
Is this ceiling light dimmable?
No. It operates through a push-button switch for on/off control only. If dimming is a requirement, choose a different fixture rather than adding a dimmer to this one.
Can it go in a bathroom or a damp location?
No. The IP20 rating covers dry indoor locations only. Bathrooms, laundry rooms, basements with moisture and covered outdoor areas are all outside its rating.
Does it need a bulb or a separate driver?
Neither. The LED is integrated and the driver requirement is stated as yes/included, so the fixture is self-contained. There is nothing to source separately.
How much area will one 17.3-inch fixture light?
The product data does not publish lumen output, so any square-footage number would be guesswork. In practice, one unit handles a single bedroom or a small living zone; for open plans, use two or three in a row rather than stretching one fixture.
What is the difference between the white, green and beige versions?
Finish only — the dimensions, LED module, color temperature options and IP20 rating are shared across all three. Choose white to blend with the ceiling, beige for warmer neutral interiors, green as a deliberate accent.
Who this fixture suits
It is a good fit for a low-ceiling bedroom, a walk-in closet, a hallway run, or a home office where you want an even, diffused light that stays out of your sightline — and where on/off control is enough. It is the wrong choice for a damp room, a room that needs dimming, or a large space expecting one fixture to do everything.
Available in white, green and beige with your choice of 3000K, 4500K or 6000K — see the 17.3-inch resin flush mount ceiling light at MiniHouzz, where expedited shipping and custom requests can be arranged through the support team. If you are matching several fixtures across rooms or need a lighting layout reviewed before you order, start from the product page and ask the design consultants directly.