A farmhouse glass pendant light is the simplest way to add warmth over a kitchen island without blocking sightlines. This one pairs a clear blown-glass shade with brass and metal accents, measures roughly 5.9 inches across by 5.1 inches tall, and hangs from a 59-inch adjustable cord — small enough to group in a row, refined enough to stand alone over a dining table or in an entry.
Below: what the fixture is actually made of, how high to hang it, how many you need, which bulb to buy, and the full spec sheet.
Design and materials
The shade is clear glass, produced with a blown-glass process and a polished finish. Because the glass is transparent, the bulb is part of the design — an Edison-style filament bulb reads as deliberate, while a frosted or coated LED reads softer and more modern.
The fittings are metal with brass accents. The listing specifies a clear finish, so the metal is there to frame the glass rather than to dominate it. That is what keeps the piece in farmhouse and cottage territory instead of tipping into industrial.
Dimensions put this in the small-pendant category:
- Diameter: 15 cm / 5.9 in
- Height (shade only): 13 cm / 5.1 in
- Weight: 2 kg / 4.4 lbs
- Cord: 150 cm / 59 in, adjustable
At under six inches wide, a single unit will look lost over a large island. Three of them spaced evenly, or a pair over a small dining table, is closer to how this size is intended to be used. If you need one fixture to carry a big surface on its own, this is the wrong scale — browse the wider pendant light range for larger formats.
Where it works best
Kitchen islands
This is the natural home for a clear glass farmhouse pendant. Aim for the bottom of the shade to land 30–36 inches above the countertop. Higher than that and the light scatters and stops reading as task lighting; lower and it intrudes on the workspace and into the eyeline of anyone standing at the island.
For a row of three over an island, a workable starting point is spacing them roughly 24–30 inches apart on center, then adjusting so each pendant sits centered over a seating position or over one third of the island. Check the total width of the row against your island length before you drill — clear glass shows off-center spacing immediately.
Dining tables
Over a dining table, hang the shade 30–36 inches above the tabletop. With a round or square table up to about 48 inches, a single pendant centered above the middle is clean and adequate. On longer rectangular tables, two units spaced evenly read better than one small fixture floating in a gap.
The clear glass works in your favor here: it disappears from the eyeline of people seated across from each other, so conversation stays open.
Entryways, hallways and bedrooms
Because the cord is adjustable to 59 inches, the same fixture can drop low in a stairwell or two-story entry, or be pulled up tight for a hallway or bedside corner. The listing rates it IP20 and indoor only — do not use it in a bathroom zone that gets direct spray, or outdoors on a covered porch.
Specifications
| Item | Detail |
|---|---|
| Shade size | Dia 15 cm x H 13 cm / 5.9 in x 5.1 in |
| Materials | Metal, brass, glass |
| Finish | Clear |
| Process | Polishing, blown glass |
| Bulb type | LED or Edison bulb |
| Base type | E26 or E27 |
| Max power | 40W |
| Voltage | AC 110–240V |
| Mounting | Ceiling |
| Environment | Indoor |
| IP rating | IP20 |
| Weight | 2 kg / 4.4 lbs |
| Control | Push button switch, not dimmable |
| Cord length | 150 cm / 59 in |
According to the manufacturer, the fixture is UL certified, ETL listed, CE approved, RoHS compliant and FCC certified. Confirm the specific mark your project requires with the seller before ordering, since requirements differ between residential and commercial jobs.
Bulb choice and light quality
The socket takes E26 or E27 bulbs up to 40W, which covers both North American and European bases. Two decisions matter more than wattage:
- Shape and visibility. The glass is clear, so the bulb is on display. A filament Edison bulb in a warm color temperature sells the farmhouse look; an opal or frosted LED hides the diode and gives a cleaner, more contemporary feel.
- Color temperature. Around 2700K keeps the scene warm and suits wood, brass and natural stone. 3000K is slightly crisper and better if the island doubles as a prep surface. Anything at 4000K or above inside a clear glass shade tends to look clinical in a residential kitchen.
One limitation to plan around: this pendant uses a push button switch and is not dimmable. If you want evening dimming over a dining table, treat that as a different fixture requirement rather than something a dimmable bulb can solve.
Because the shade is small and open, light output matters. A single 40W-equivalent bulb in a 5.9-inch clear shade is enough for accent and ambient light over a table or entry, but a row of three is what actually lights an island for prep work. Buy the farmhouse glass pendant light as a set if you are lighting a run of counter.
Installation notes
This is a hardwired ceiling fixture, not a plug-in. There is no driver required, so it wires like a conventional pendant and works on standard 110–240V supply.
- Cut power at the breaker before touching the existing fixture.
- Confirm the ceiling box is rated for the load — at 4.4 lbs the fixture itself is light, but the box must still support a ceiling-mounted pendant.
- Set the cord length before you hang it: loosen the strain relief, slide the cord, retighten. With 59 inches available you have plenty of adjustment for an 8–9 foot ceiling.
- Hang the fixture and check the height against your countertop or tabletop with a tape measure, not by eye.
- Fit the bulb last, so you are not handling glass with dusty hands.
If you are running several pendants off one switch, align the shades to each other with a laser or a taut string rather than measuring each drop independently. Small height differences are very visible through clear glass.
Care and finishes over time
Clear glass shows fingerprints and cooking residue, especially over an island. Wipe the shade with a soft dry or slightly damp cloth; avoid abrasive pads and ammonia-heavy cleaners on the metal fittings. Brass accents develop their own patina, which is part of the look — if you want to keep them bright, dry rather than wet-polish them.
Because the shade is open at the bottom, expect to dust the inside of the glass periodically. That is a two-minute job with the bulb removed and is the main thing that keeps the fixture looking new.
Frequently asked questions
Is this pendant light dimmable?
No. It uses a push button switch and is designed for standard on/off operation. If dimming matters for your room, plan for a different fixture rather than a dimmable bulb.
What bulb does it take?
An LED or Edison bulb with an E26 or E27 base, up to 40W maximum. A warm-white filament bulb shows best through the clear glass.
Can I shorten the cord?
Yes. The cord is 150 cm / 59 in and adjustable, so you can set the hanging height to suit your ceiling and room layout.
How many do I need over a kitchen island?
At 5.9 inches in diameter, three units spaced roughly 24–30 inches apart on center is a realistic starting point for a standard island. For a very short island, two is usually better than one.
Can it be used outdoors or in a bathroom?
No. It is rated IP20 for indoor use. Keep it out of damp zones and covered outdoor areas.
Does it include a bulb?
The listing does not state that a bulb is included, so plan to supply your own E26/E27 bulb.
The short version
This is a small, clear-glass farmhouse pendant with brass and metal accents, a 59-inch adjustable cord, an E26/E27 socket capped at 40W, and no dimming. It is at its best repeated in a row over an island or paired over a dining table, hung 30–36 inches above the surface. Buy it as part of a set, pick a warm filament bulb, and it reads as considered rather than decorated.