This is a two-arm wall sconce built around a hand-carved wood base finished in old white, with iron arms dusted in a vintage gold. At 25.6 in (65 cm) tall and 14.6 in (37 cm) across, it is a vertical statement piece rather than a fill-in light — which makes it a strong fit for bedrooms, hallways, stairwells and vanity walls where there is real height to work with, and a poor fit for tight spots under 24 in of clearance.
Below: what the materials actually are, how high to mount it, how far apart to space a pair, and which bulbs suit an E12/E14 socket.
What the fixture is made of
Two components, one contrast. The base is hand-carved wood with an old-white finish; the arms are iron, dusted in vintage gold. The visual idea is a soft, slightly aged white ground with a thin metallic line crossing it — warmer and less formal than polished brass, less rustic than raw timber.
Because the base is carved and hand-finished, wood grain and finish will vary piece to piece. That is a feature of the construction, not a defect, but it does mean no two units are identical — worth knowing if you are ordering two for a symmetric pair and expecting a mirror-image match.
Where a 25.6-inch sconce actually works
Height is the deciding factor. This fixture wants a wall with room to breathe vertically.
- Bedroom, flanking the bed. The classic use. Two arms give a pleasing spread of light at head height without eating nightstand surface.
- Hallway and stairwell. The warm wood-and-gold mix reads well against plaster, and the vertical proportion suits narrow corridors better than a wide flush mount.
- Bathroom vanity. Only where the mirror is wide enough and the wall is not a wet zone directly above a shower — a carved wood base prefers a dry position.
- Skip it in low-clearance spots, on a wall shorter than roughly 30 in of usable height, or anywhere the sconce would sit below shoulder height in a walkway.
Mounting height and spacing
There is no single correct number, but these ranges cover most rooms. Treat them as starting points, then eyeball from the doorway before drilling. The fixture projects from a single wall plate with both arms crossing at the carved base, so the full 25.6 in height is what you are centering, not the plate.
Beside a bed
Aim for the center of the fixture roughly 55–65 in above the floor, or about 20–30 in above the mattress top. Since this piece is 25.6 in tall, check that the bottom arm clears the nightstand by at least a hand’s width. For a queen or king bed, place each sconce about 8–12 in out from the edge of the mattress so the arms read as a pair but do not crowd the pillows.
In a hallway
Center height of 60–66 in above the floor works for most corridors. Space repeated sconces 8–10 ft apart on a long run, and keep at least 3 ft clear of any door swing. On a short hallway, one fixture centered on the longest blank wall usually looks more deliberate than two squeezed in.
Over a vanity or console
If used singly over a console or dresser, hang so the lower arm sits about 18–24 in above the surface — enough to light what is below, high enough to avoid head contact when someone leans in.
Specifications
| Spec | Detail |
|---|---|
| Configuration | 2 heads / two arms |
| Dimensions | Dia. 37 cm (14.6 in) x H 65 cm (25.6 in) |
| Finish | Vintage gold arms, old white base |
| Materials | Iron arm, wooden base |
| Socket | E12 or E14 (bulbs not included) |
| SKU | RDW-142715 |
| Compliance | Listed as UL certified, ETL listed, CE approved, RoHS compliant, FCC certified |
Dimensions may vary slightly from manual measurement. Finish and tone can also read differently between photography, monitor calibration and production batch — expect the gold to be a muted antique tone rather than a bright polish.
Choosing bulbs for an E12/E14 socket
The socket takes candelabra-base bulbs in E12 (North American) or E14 (European) — the two are not interchangeable, so match the bulb to the socket your unit ships with. Bulbs are not included, which is normal for this category and lets you set the mood yourself.
- Shape: a candelabra or torpedo bulb keeps the silhouette clean; a globe will fight the thin iron arms.
- Color temperature: 2700K for bedrooms and living areas, 3000K if the sconce is task-adjacent in a hallway or over a vanity.
- Output: two bulbs at roughly 400–500 lumens each is plenty for ambient wall light; go lower if you want a purely decorative glow.
- Dimming: only if both the bulb and the wall switch/dimmer are rated for it — check before buying smart bulbs.
What it pairs well with
Because the palette is old white plus antique gold, the fixture sits comfortably in several directions:
- Warm neutrals. Linen, oatmeal, soft plaster — the gold reads as a quiet accent rather than a highlight.
- Deep greens and navy. The white base pops against saturated walls; this is the highest-contrast option.
- Natural materials. Rattan, oak, jute and stoneware all pick up the carved wood without matching it literally.
- What to avoid. Chrome and cool silver hardware in the same sightline — the two metal temperatures tend to argue.
Care and finish notes
Dust with a dry, soft cloth; a slightly damp cloth is fine on the iron. Keep abrasive cleaners and polish off the old-white finish, and avoid soaking the wood base — a carved, hand-finished surface is more forgiving of a dry wipe than of liquid. In a bathroom, run the extractor fan as usual and position the sconce away from direct spray.
FAQ
How big is this wall sconce?
It measures 37 cm (14.6 in) in diameter across the arms and 65 cm (25.6 in) tall. Slight variation is normal with manual measurement.
Does it come with bulbs?
No. It uses E12 or E14 bulbs, sold separately. Choose the base type that matches the socket on your unit.
Can it be used in a bathroom?
It can work beside a vanity in a well-ventilated bathroom, but the base is carved wood, so keep it out of direct shower spray and away from standing moisture.
Will two units look identical?
No. Each base is hand-carved and hand-finished, so grain and tone vary slightly between pieces. Plan for a matched pair in spirit, not a mirror image.
Is the fixture certified?
The product listing states UL certification, ETL listing, CE approval, RoHS compliance and FCC certification. Confirm the rating printed on the label of the unit you receive if your installation requires a specific mark.
Is it the right sconce for your wall?
If you have 30 in or more of usable wall height and want a warm, slightly aged pairing of carved wood and antique gold, this two-light sconce does the job with very little styling effort. If your wall is short, or you need a wide horizontal spread of light, a lower-profile fixture will serve you better.
See the Carved Wood & Vintage Gold 2-Light Wall Sconce on MiniHouzz →
Need a custom dimension, a lighting layout for a pair, or expedited shipping? The MiniHouzz design team takes those requests directly through the product page.



