If you want a wall light that looks custom-made yet reads clean and quiet on the wall, a brass wall sconce with a white alabaster shade is one of the most versatile choices in upscale residential lighting. The Brass Wall Sconce with White Alabaster Shade pairs an antique-brass arm with a tall, thin alabaster canister shade, and it arrives as a set of two so both sides of a bed, a mirror, or an entryway can be lit with matching fixtures. It is hardwired, takes E14 bulbs, and is rated for indoor dry locations.
Why Brass and Alabaster Are a Designer Favorite
Each sconce is constructed from metal with an antique brass finish, and the shade is genuine white alabaster. Because alabaster is a natural stone, its veining and coloration vary from piece to piece, so no two sconces are identical. Rather than a flaw, that variation is what gives the fixture its hand-finished, gallery-like quality. The body is offered in brass or black finishes, letting you lean warm and traditional with brass or crisp and modern with black, both capped by the same luminous white shade. The tall canister shape also diffuses light softly instead of throwing a bright hotspot, which is why this style suits spaces where you want ambiance rather than task glare.
Where This Sconce Works Best
Because each fixture is rated IP20 and intended for indoor dry locations, it is best used away from direct water and heavy moisture. The places it shines:
- Bedside: Flanking a bed as a pair gives you symmetry and frees up the nightstand.
- Hallway and entry: A matched set frames a corridor or front foyer with even, welcoming light.
- Mirror or vanity: One on each side of a mirror balances light across the face.
- Living, dining, and study: Adds layered ambient light without a ceiling fixture.
- Hospitality: A natural fit for hotel, restaurant, and commercial interiors where a set is repeated along a wall.
You can see the full configuration and current pricing on the product page.
Placement and Installation
This fixture is hardwired and compatible with standard wall switches, so it should be installed at a junction box by a licensed electrician. The guidance below reflects standard interior design conventions and a common starting point, not a fixed rule, since ceiling height, furniture, and eye level all shift the ideal number.
Bedside placement
A common guideline is to set the center of the shade roughly 55 to 65 inches from the floor, or about 8 to 12 inches above the top of a nightstand, so the light falls near a seated reader’s shoulder rather than in their eyes. Centering each sconce over its half of the headboard keeps the pair balanced.
Flanking a mirror or vanity
Mount the fixtures vertically on each side of the mirror, centered near eye level (often around 60 to 70 inches from the floor), and leave a comfortable gap of about 6 to 8 inches between the fixture and the mirror edge. This placement reduces shadows across the face compared with light coming from above.
Hallways
Space sconces evenly along the wall, commonly 4 to 6 feet apart, with the center of each shade around 60 to 66 inches from the floor. Keeping consistent spacing avoids a choppy rhythm along an entry or corridor.
Size A vs. Size B
The set includes two separate fixtures packaged together for symmetrical installation, and each fixture is available in two proportions. Both share the same 18.9 inch height; the difference is how far the arm and shade reach out from the wall.
| Size | Width / Projection | Height | Best for |
|---|---|---|---|
| Size A | W 12 cm (4.7 in) | H 48 cm (18.9 in) | Tighter spots and narrower walls |
| Size B | W 24.5 cm (9.6 in) | H 48 cm (18.9 in) | Where a larger, more sculptural reach is wanted |
If you are unsure which proportion suits your wall, the MiniHouzz design team can advise on layout, and you can review both options on the sconce listing.
Specifications
| Configuration | Set of two fixtures packaged together |
|---|---|
| Materials | Brass, alabaster, metal |
| Body finishes | Brass or black |
| Shade finish | White alabaster |
| Light source | Compatible with LED bulbs or Edison bulbs |
| Base type | E14 |
| Voltage | AC 110-240V |
| Mounting | Wall-mounted |
| Wiring | Hardwired |
| Control | Compatible with standard wall switches |
| Moisture resistance | IP20, rated for indoor dry locations |
| Certifications | UL, ETL, CE, and SAA listed; RoHS compliant; FCC certified |
Note that dimensions may have slight manual measurement variations, and colors or color temperatures may vary slightly due to photography lighting and display differences.
Bulbs and Light Quality
The fixture uses an E14 base and works with LED or Edison-style bulbs, so you have room to tune the mood. For a bedroom, a warm 2700K bulb keeps the space restful; for a hallway or mirror, 2700K to 3000K stays cozy while still reading crisp. Alabaster is happiest with a soft, moderate output rather than a very bright bulb, since the stone diffuses light gently. To keep energy use low, choose a lower-wattage LED. If you would like dimming, confirm that you pair a dimmable bulb with a compatible dimmer switch, because dimming depends on both the bulb and the switch, not the fixture alone. A one-piece canister shade like this is also easier to keep looking even than an open-cage sconce, since the diffusing material does most of the styling for you.
Shop the E14-ready brass alabaster sconce →
Safety and Certifications
According to the manufacturer, this product complies with comprehensive international electrical safety and environmental standards and is listed as UL certified, ETL listed, CE approved, RoHS compliant, and FCC certified. For a hardwired fixture that stays in the wall for years, that listed status is worth checking, and it helps this sconce meet requirements for U.S. residential and commercial projects.
Frequently Asked Questions
What are the dimensions of each sconce?
Size A measures W 12 cm (4.7 in) x H 48 cm (18.9 in), and Size B measures W 24.5 cm (9.6 in) x H 48 cm (18.9 in). The set includes two fixtures packaged together.
What type of bulbs does this sconce use?
It is compatible with LED bulbs or Edison bulbs and uses an E14 base, operating on AC 110-240V.
Is this sconce suitable for bathroom use?
It has an IP20 rating, which protects against solid objects larger than 12.5 mm but not against water. It is rated for indoor use and is ideal for dry locations such as living rooms, bedrooms, and hallways, so it is not the right choice for a shower or a very damp bathroom zone.
Does it come as a single light or a pair?
This product is available as a set of two, with both fixtures packaged together for symmetrical installation.
Will the alabaster look exactly like the photos?
Alabaster is a natural stone, so patterns, veining, and colorations vary between individual products. Expect a close family resemblance rather than an identical match, and some variation from the photography is normal.
Can I get help with layout or expedited shipping?
Yes. MiniHouzz offers lighting layout advice, custom solutions, and expedited shipping on request, so you can contact their support team for urgent delivery or professional guidance.
Final Thoughts
A matched set of brass and alabaster sconces is a simple way to make a bedroom, hallway, or mirror wall feel considered. The Brass Wall Sconce with White Alabaster Shade delivers soft, diffused light, two finish options, and two proportion choices in one package, backed by UL, ETL, CE, and SAA listings. If you want the pair in your space, you can order the set of two here and plan your install around the two sizes above.