If you want a clean line of light along a wall instead of a scattered pool of it, a linear LED wall washer light is built for exactly that job. This fixture is a 39.2-inch (99.6 cm) aluminum uplight that grazes a vertical surface with an even glow, so brick, stone, and rendered walls read with depth rather than flat glare. Below you’ll find what’s inside the fixture, where it works best, how to plan placement, and the specs worth confirming before you buy.
Shop the Linear Up LED Wall Washer Light →
What This Linear Wall Washer Is
This is a modern, elongated uplight designed to wash light across a wall rather than spotlight a single point. At 39.2 inches (99.6 cm) wide, a single unit covers a broad, continuous band of a facade or an aisle. The light direction is upward, which produces the classic wall-wash look: the base of the wall stays softly lit and the beam fades as it rises, making a surface feel taller and more architectural.
Because the housing is long and slim (1.6 inches / 4.1 cm deep), it sits close to the wall and stays visually quiet during the day. That low profile is part of why this format is popular on villas, garden walls, and building aisles where you want the lighting to feel designed rather than added on.
Materials, Finish, and Build
The body is aluminum with a gray metal finish, topped by a tempered glass lens over the integrated LED array. That combination matters outdoors for two reasons: aluminum weathers far better than painted steel, and tempered glass resists impact and UV far better than a plastic diffuser, which can yellow or haze over time.
The fixture includes integrated mounting brackets with an adjustable tilt. That adjustability is worth noting, because it lets you fine-tune the aim of the beam after installation rather than committing to a fixed angle the moment you drill. If you need to break up a long wall run or correct a slightly uneven surface, that tilt is the tool you’ll use.
The LED light source is built in and included, with high color rendering and a long service life as specified by the manufacturer. There are no replaceable bulbs to source, which simplifies long-term upkeep.
Light Output, Color Temperature, and Power
You can choose between two color temperatures and three power levels:
- Color temperature: Warm White (3000K) or White (6000K).
- Power: 18W, 24W, or 36W.
Two limits are stated clearly and are worth planning around:
- No dimming. The fixture uses built-in, non-dimmable LED beads, so there is no brightness or color-temperature dimming. It delivers consistent, bright illumination rather than a variable output.
- DC24V with a transformer. This light operates at DC24V and needs a transformer to function. The included 110V transformer is not waterproof and must be placed indoors. The fixture itself is hardwired.
In short: the fixture is built for the outdoors, but the transformer is an indoor component. That single detail shapes where you can and can’t install this light, so it’s worth deciding on a dry indoor location early.
Where It Works Best
The listed applications are villa, garden, and aisle, and the fixture carries an IP65 ingress-protection rating. IP65 means it is protected against dust and against water projected from a nozzle, which is why it holds up as an exterior wall fixture. If you’re lighting a garden wall, a front-facade band, or a covered walkway, this format fits those jobs well.
Mounting height and spacing
There is no single correct height — it depends on what you’re washing and how tall the surface is. A few practical rules of thumb:
- For a low garden wall or planter wall, mounting near the base so the beam sweeps upward typically gives the most even wash.
- For a single-story facade, positioning the fixture so the top of the beam lands comfortably below the eave tends to avoid harsh hotspots right under the roof line.
- For long walls, space units so their wash patterns overlap slightly at the wall rather than leaving dark gaps between them. Because each unit is 39.2 inches wide, plan spacing around that footprint.
If you’re washing a very tall wall, remember this is an uplight: it is designed to throw light upward, so it will read best on surfaces where a rising gradient is the goal. Adjust the integrated tilt brackets in small increments and check the result at night before finalizing positions.
Choosing 3000K or 6000K
Color temperature changes the mood more than most specs:
- 3000K Warm White suits residential and hospitality settings — villas, garden walls, and entrances where you want a welcoming, softer feel. It tends to flatter stone, brick, and wood.
- 6000K White is cooler and crisper. It suits modern facades, concrete, and commercial or security-oriented lighting where clarity and a brighter look matter more than warmth.
A common approach is to keep a single color temperature across a connected lighting scheme for visual consistency. If two fixtures face the same wall, matching their Kelvin avoids an obvious mismatch.
Specifications at a Glance
| Spec | Detail |
|---|---|
| Product name | LED Wall Washer Lights |
| Style | Industrial |
| Fixture material | Aluminum (gray metal finish) |
| Shade material | Tempered glass |
| Light source | LED (included), integrated beads |
| Light direction | Up |
| Color temperature | Warm White (3000K), White (6000K) |
| Power | 18W, 24W, 36W |
| Dimming | No (non-dimmable) |
| Voltage | DC24V (requires transformer) |
| Power supply | Hardwired; 110V transformer not waterproof, place indoors |
| Ingress protection | IP65 |
| Applicable scene | Villa, Garden, Aisle |
| Certification | UL Certified, ETL Listed, CE Approved, RoHS Compliant, FCC Certified |
Dimensions and weight
| Configuration | Size (W x D x H) | Weight |
|---|---|---|
| Without baffle | 39.2” x 1.6” x 1.7” (99.6 x 4.1 x 4.3 cm) | 4.41 lb (2.0 kg) |
| With baffle | 39.2” x 1.6” x 2.7” (99.6 x 4.1 x 6.9 cm) | 5.51 lb (2.5 kg) |
Two versions are offered: one without a baffle and one with a baffle, which adds height and a little weight. If glare control matters to you — for example, if people will view the fixture from below — the baffled version is the one to consider. The dimensions are manual measurements and may vary slightly.
Quick Decision Checklist
- Where will the transformer live? If you can’t place the 110V transformer indoors and dry, this fixture isn’t the right fit for that spot.
- Warm or cool? Choose 3000K for residential warmth, 6000K for a modern, crisp look — and keep it consistent across a shared wall.
- How much power? Match 18W, 24W, or 36W to the size and brightness of the surface you’re washing.
- Baffle or not? Add the baffle version if you want extra glare control at eye level.
- How many units? Plan around a 39.2-inch footprint and overlap the washes so there are no dark gaps.
Check current pricing and options for the Linear Up LED Wall Washer Light →
Frequently Asked Questions
Is this wall washer dimmable?
No. The fixture uses built-in, non-dimmable LED beads and provides consistent, bright illumination without brightness or color-temperature dimming.
Can the transformer be placed outdoors?
No. The included 110V transformer is not waterproof and must be placed indoors in a dry location. The fixture itself is IP65 rated for outdoor use, but the transformer is an indoor component.
What is the voltage requirement?
This LED wall washer operates at DC24V and requires the included 110V transformer to function properly. It is hardwired for installation.
Can I use this fixture in a garden or near water?
Yes. The fixture is IP65 rated, making it suitable for outdoor applications such as villas, gardens, and aisles. The transformer, however, must remain indoors.
Do you offer expedited shipping?
Yes. Expedited shipping options are available. For urgent delivery, contact the support team to discuss your timeline and requirements.
Bottom Line
If your goal is an even, architectural wash of light along an outdoor wall, the Linear Up LED Wall Washer Light delivers it in a slim aluminum body with a tempered glass lens, IP65 protection, and a choice of 3000K or 6000K at 18W, 24W, or 36W. The one thing to plan around is the transformer: it’s not waterproof and needs a dry indoor home. Sort that out first, pick your color temperature, and this uplight will do the rest.
