If you are looking for a bedside or end-table lamp that gives off light without giving you a hotspot, the MiniHouzz contemporary table lamp answers the question directly: it is an 18.9-inch accent lamp with a sculpted metal shade, an opal acrylic diffuser, and three G9 sockets, priced at $206.99. The diffuser is the important part. Instead of a bare bulb or an open cage, the light passes through an opal panel, so what you see from the side is a soft, even glow rather than a bright point. That single decision is what makes this lamp feel calm at night and still look like a piece of furniture during the day.
See the Minihouzz contemporary table lamp →
What the opal diffuser actually changes
An opal diffuser is a translucent acrylic panel that sits between the bulb and the room. It does two things at once. First, it spreads light across its whole surface, which converts three small G9 sources into one large, low-glare plane of light. Second, it hides the bulbs, so you never see the filament itself when you are lying in bed or sitting on a sofa.
The trade-off is honest: a diffuser softens light and costs you some intensity. That is fine for a bedside lamp, where you want enough light to read by but not a beam. It is less suited to a desk where you need task-level brightness on a page.
Where the light goes
On this lamp, light leaves through the top iron feature as well as through the shade, so the fixture throws illumination upward and outward at the same time. In practice that means:
- Upward spill grazes the wall behind the lamp and adds a soft wash of ambient light to the corner.
- Outward glow through the diffuser gives you usable light at seated height, which is where you actually read.
- Almost no downward beam, so the lamp will not create hard shadows on a nightstand or a stack of books.
Materials, finish, and the five colorways
The body is metal with an acrylic diffuser — a combination chosen for weight and stability at the base with a lighter visual mass at the top. The shade and body are finished in two-tone pairs: Gold and Black, Gold and Blue, Gold and White, Gold and Green, and Gold and Red. The shade finish matches the accent color in each pairing.
Two practical notes before you order. MiniHouzz states that the blue and green versions can show slight color variation between production batches, so if you are buying a matched pair, order them together rather than months apart. And the gold in this range reads as an accent, not a mirror polish — it is meant to sit beside warm wood, plaster, and matte black rather than compete with chrome.
Sizing it correctly: nightstand, console, or end table
At 13.8 inches in diameter and 18.9 inches tall, this is a substantial accent lamp — closer to a statement piece than a small bedside filler. Two numbers decide whether it works in your room: the height of the surface it sits on, and the height of your eyes when you are seated.
The general rule most interior lighting work follows is that the bottom of the shade should land near seated eye level. Sit on the bed or sofa, look straight ahead, and estimate where your eye line hits the wall. If the shade occupies that zone, the bulb is shielded from your sightline and the light reads as soft rather than glaring.
Placement by surface height
- Nightstand, 24–28 inches tall: the top of the lamp lands around 43–47 inches from the floor, which is typically at or slightly above seated eye level in bed. This is the range to aim for and the most natural use of the lamp.
- Console or sideboard, 30–34 inches tall: the lamp top reaches roughly 49–53 inches. It will sit above eye level when you are seated nearby, which pushes the light higher and makes the piece read more like decor than a reading lamp. Keep 8–12 inches of clearance from the wall so the upward spill has somewhere to land.
- Low end table, under 22 inches: the shade will sit below eye level and the diffuser becomes visible from above. Acceptable in a hallway or entry, less comfortable beside a reading chair.
Because the shade is 13.8 inches wide, measure your tabletop before committing. A nightstand narrower than about 18 inches will leave the shade overhanging, which looks top-heavy and puts the lamp at risk of being knocked. On a narrow table, one lamp centered is better than two squeezed to the edges.
Bulbs: three G9 sockets and what to put in them
The lamp takes three G9 bulbs, and it accepts either LED or Edison-style bulbs. G9 is a small pin-base format, so check the base type on any bulb you buy — a standard E26 screw bulb will not fit.
For most bedrooms and living rooms, a 3–5W LED G9 in 2700K is the sensible default. Three of them give a warm, residential light level that suits a bedside or end table, and because the diffuser spreads the output you get even coverage instead of three bright patches. If you want a slightly cooler, more contemporary look in a living room with grey or white walls, 3000K is a reasonable alternative. Edison-style G9 bulbs add a vintage look, but most of that effect is hidden behind the diffuser — so there is little visual gain for the extra heat.
Switching and dimming
This lamp is operated by an inline on/off push button switch or a pull cord switch, and MiniHouzz states it is not designed for dimming. Plan accordingly:
- If you want full brightness only, use the built-in switch and skip the dimmer entirely.
- If you want dimming, the workable route is smart G9 bulbs with the inline switch left in the on position — but with three separate bulbs you will need to control them as a group, and consistency across three units matters more than with a single-bulb lamp.
- Do not pair the lamp with a wall dimmer and assume it will work. The manufacturer explicitly does not rate it for dimming.
Where it belongs — and where it does not
The lamp is IP20 damp-rated and rated for indoor use only. That means bedrooms, living rooms, hallways, home offices, and covered interior spaces. It is not a bathroom vanity light, not a porch lamp, and not something to place near a shower or an open window where it will get wet. IP20 protects against fingers and solid objects, not water.
The 59.1-inch power cord includes the switch and plug, so you have roughly five feet of reach. Check that distance to your nearest outlet before you commit to a corner — a lamp this size looks best with the cord routed behind the furniture rather than stretched across the floor.
Specifications at a glance
| Specification | Detail |
|---|---|
| Diameter | 35 cm / 13.8 in |
| Height | 48 cm / 18.9 in |
| Light sources | 3 × G9 sockets (LED or Edison bulbs) |
| Materials | Metal body, acrylic opal diffuser |
| Voltage | AC 110–240V |
| Rating | IP20 damp-rated, indoor use only |
| Switching | Inline on/off push button or pull cord; not rated for dimming |
| Power cord | 59.1 in / 150.1 cm, including switch and plug |
| Finishes | Gold + Black, Gold + Blue, Gold + White, Gold + Green, Gold + Red |
| Packing size | 56 × 41 × 41 cm |
| Certification | UL, ETL, CE, SAA listed; RoHS and FCC compliant (as stated by the manufacturer) |
| Price | $206.99 |
Check current price and finish availability →
Is this lamp right for your room?
Choose it if you want a soft, glare-free bedside or end-table lamp with a design presence, you have a nightstand at least 18 inches wide, and you like a two-tone metal finish with a warm accent.
Skip it if you need a dimmable fixture, you want a task lamp for focused work, you plan to use it outdoors or in a bathroom, or your table is narrow and low. In those cases a single-bulb, dimmable reading lamp will serve you better.
Pre-purchase checklist
- Measure your nightstand or table width — 18 inches or more, ideally 20+.
- Check the surface height — 24–28 inches is the sweet spot for this lamp.
- Confirm an outlet within about five feet, allowing for cord routing.
- Decide on the colorway, and order multiples together to keep the batch consistent.
- Buy three G9 bulbs in the same wattage and color temperature.
- Confirm you do not need dimming.
Frequently asked questions
What bulbs does this table lamp use?
Three G9-base bulbs. LED and Edison-style G9 bulbs both work. For a warm bedside look, 3–5W LED G9 at 2700K is a practical choice.
Can this lamp be dimmed?
No. MiniHouzz states the lamp is not designed for dimming. It runs on an inline on/off push button switch or a pull cord switch. If dimming matters to you, look for a fixture that is explicitly rated for it rather than adding a dimmer to this one.
Is it safe for a bathroom?
It is IP20 rated and intended for indoor dry use. That is not a bathroom, laundry, or covered-outdoor rating. Keep it in bedrooms, living rooms, hallways, and home offices.
Will the gold finish match other brass or gold pieces?
The gold here is an accent finish used with black, blue, white, green, or red. It pairs most easily with warm woods, matte black, and neutral plaster walls. If you are matching an existing polished brass fixture exactly, expect a visible difference in tone.
How much light does it give off?
That depends on the bulbs you install, since they are not included with a fixed output. Three 3–5W LED G9 bulbs at 2700K produce a comfortable residential level for a bedside or end table; the opal diffuser spreads that output evenly instead of concentrating it.
The short version
This is a well-proportioned accent lamp for anyone who wants warm, diffused light rather than a bright point source. Its strengths are the opal diffuser, the three-socket output, and a metal build that looks considered from every angle. Its limits are equally clear: no dimming, indoor only, and a 13.8-inch footprint that needs a real table under it. Match it to a nightstand of 24–28 inches and three 2700K LED G9 bulbs, and it does exactly what a bedside lamp should.
Shop the Minihouzz contemporary table lamp with metal shade and opal diffuser →
