# MiniHouzz MiniHouzz - Site: https://minihouzz.com/ ## Farmhouse Glass Pendant Light with Adjustable Cord - Link: https://minihouzz.com/farmhouse-glass-pendant-light-adjustable-cord-guide/ - Published: 2026-11-12T20:35:50+08:00 - Author: Allen A farmhouse glass pendant light is the simplest way to add warmth over a kitchen island without blocking sightlines. This one pairs a clear blown-glass shade with brass and metal accents, measures roughly 5.9 inches across by 5.1 inches tall, and hangs from a 59-inch adjustable cord — small enough to group in a row, refined enough to stand alone over a dining table or in an entry. Below: what the fixture is actually made of, how high to hang it, how many you need, which bulb to buy, and the full spec sheet. ## Design and materials The shade is clear glass, produced with a blown-glass process and a polished finish. Because the glass is transparent, the bulb is part of the design — an Edison-style filament bulb reads as deliberate, while a frosted or coated LED reads softer and more modern. [⌊Clear blown-glass shade of the farmhouse pendant light with brass and metal fittings⌉⌊ Clear blown-glass shade of the farmhouse pendant light with brass and metal fittings⌉[ The fittings are metal with brass accents. The listing specifies a clear finish, so the metal is there to frame the glass rather than to dominate it. That is what keeps the piece in farmhouse and cottage territory instead of tipping into industrial. Dimensions put this in the small-pendant category: * **Diameter:** 15 cm / 5.9 in * **Height (shade only):** 13 cm / 5.1 in * **Weight:** 2 kg / 4.4 lbs * **Cord:** 150 cm / 59 in, adjustable At under six inches wide, a single unit will look lost over a large island. Three of them spaced evenly, or a pair over a small dining table, is closer to how this size is intended to be used. If you need one fixture to carry a big surface on its own, this is the wrong scale — browse the wider [pendant light range](https://minihouzz.com/products/farmhouse-glass-pendant-light-adjustable-cord/) for larger formats. ## Where it works best ### Kitchen islands This is the natural home for a clear glass farmhouse pendant. Aim for the bottom of the shade to land 30–36 inches above the countertop. Higher than that and the light scatters and stops reading as task lighting; lower and it intrudes on the workspace and into the eyeline of anyone standing at the island. [⌊Farmhouse glass pendant light hanging above a kitchen island counter⌉⌊Farmhouse glass pendant light hanging above a kitchen island counter⌉[ For a row of three over an island, a workable starting point is spacing them roughly 24–30 inches apart on center, then adjusting so each pendant sits centered over a seating position or over one third of the island. Check the total width of the row against your island length before you drill — clear glass shows off-center spacing immediately. ### Dining tables Over a dining table, hang the shade 30–36 inches above the tabletop. With a round or square table up to about 48 inches, a single pendant centered above the middle is clean and adequate. On longer rectangular tables, two units spaced evenly read better than one small fixture floating in a gap. The clear glass works in your favor here: it disappears from the eyeline of people seated across from each other, so conversation stays open. [⌊Glass pendant light with adjustable cord shown at dining table height⌉⌊Glass pendant light with adjustable cord shown at dining table height⌉[ ### Entryways, hallways and bedrooms Because the cord is adjustable to 59 inches, the same fixture can drop low in a stairwell or two-story entry, or be pulled up tight for a hallway or bedside corner. The listing rates it IP20 and indoor only — do not use it in a bathroom zone that gets direct spray, or outdoors on a covered porch. ## Specifications | Item | Detail | | Shade size | Dia 15 cm x H 13 cm / 5.9 in x 5.1 in | | Materials | Metal, brass, glass | | Finish | Clear | | Process | Polishing, blown glass | | Bulb type | LED or Edison bulb | | Base type | E26 or E27 | | Max power | 40W | | Voltage | AC 110–240V | | Mounting | Ceiling | | Environment | Indoor | | IP rating | IP20 | | Weight | 2 kg / 4.4 lbs | | Control | Push button switch, not dimmable | | Cord length | 150 cm / 59 in | According to the manufacturer, the fixture is UL certified, ETL listed, CE approved, RoHS compliant and FCC certified. Confirm the specific mark your project requires with the seller before ordering, since requirements differ between residential and commercial jobs. ## Bulb choice and light quality The socket takes E26 or E27 bulbs up to 40W, which covers both North American and European bases. Two decisions matter more than wattage: * **Shape and visibility.** The glass is clear, so the bulb is on display. A filament Edison bulb in a warm color temperature sells the farmhouse look; an opal or frosted LED hides the diode and gives a cleaner, more contemporary feel. * **Color temperature.** Around 2700K keeps the scene warm and suits wood, brass and natural stone. 3000K is slightly crisper and better if the island doubles as a prep surface. Anything at 4000K or above inside a clear glass shade tends to look clinical in a residential kitchen. One limitation to plan around: this pendant uses a push button switch and is **not dimmable**. If you want evening dimming over a dining table, treat that as a different fixture requirement rather than something a dimmable bulb can solve. [⌊Close view of the E26 socket and clear glass shade on the farmhouse pendant light⌉⌊ Close view of the E26 socket and clear glass shade on the farmhouse pendant light⌉[ Because the shade is small and open, light output matters. A single 40W-equivalent bulb in a 5.9-inch clear shade is enough for accent and ambient light over a table or entry, but a row of three is what actually lights an island for prep work. Buy the [farmhouse glass pendant light](https://minihouzz.com/products/farmhouse-glass-pendant-light-adjustable-cord/) as a set if you are lighting a run of counter. ## Installation notes This is a hardwired ceiling fixture, not a plug-in. There is no driver required, so it wires like a conventional pendant and works on standard 110–240V supply. 1. Cut power at the breaker before touching the existing fixture. 2. Confirm the ceiling box is rated for the load — at 4.4 lbs the fixture itself is light, but the box must still support a ceiling-mounted pendant. 3. Set the cord length before you hang it: loosen the strain relief, slide the cord, retighten. With 59 inches available you have plenty of adjustment for an 8–9 foot ceiling. 4. Hang the fixture and check the height against your countertop or tabletop with a tape measure, not by eye. 5. Fit the bulb last, so you are not handling glass with dusty hands. If you are running several pendants off one switch, align the shades to each other with a laser or a taut string rather than measuring each drop independently. Small height differences are very visible through clear glass. ## Care and finishes over time Clear glass shows fingerprints and cooking residue, especially over an island. Wipe the shade with a soft dry or slightly damp cloth; avoid abrasive pads and ammonia- heavy cleaners on the metal fittings. Brass accents develop their own patina, which is part of the look — if you want to keep them bright, dry rather than wet-polish them. Because the shade is open at the bottom, expect to dust the inside of the glass periodically. That is a two-minute job with the bulb removed and is the main thing that keeps the fixture looking new. ## Frequently asked questions ### Is this pendant light dimmable? No. It uses a push button switch and is designed for standard on/off operation. If dimming matters for your room, plan for a different fixture rather than a dimmable bulb. ### What bulb does it take? An LED or Edison bulb with an E26 or E27 base, up to 40W maximum. A warm-white filament bulb shows best through the clear glass. ### Can I shorten the cord? Yes. The cord is 150 cm / 59 in and adjustable, so you can set the hanging height to suit your ceiling and room layout. ### How many do I need over a kitchen island? At 5.9 inches in diameter, three units spaced roughly 24–30 inches apart on center is a realistic starting point for a standard island. For a very short island, two is usually better than one. ### Can it be used outdoors or in a bathroom? No. It is rated IP20 for indoor use. Keep it out of damp zones and covered outdoor areas. ### Does it include a bulb? The listing does not state that a bulb is included, so plan to supply your own E26/ E27 bulb. ## The short version This is a small, clear-glass farmhouse pendant with brass and metal accents, a 59- inch adjustable cord, an E26/E27 socket capped at 40W, and no dimming. It is at its best repeated in a row over an island or paired over a dining table, hung 30– 36 inches above the surface. Buy it as part of a set, pick a warm filament bulb, and it reads as considered rather than decorated. [View the farmhouse glass pendant light — $92.99](https://minihouzz.com/products/farmhouse-glass-pendant-light-adjustable-cord/) ## Modern Pendant Light for a Kitchen Island: 3- vs 5-Head Guide - Link: https://minihouzz.com/modern-pendant-light-kitchen-island-3-vs-5-head-guide/ - Published: 2026-11-12T14:31:45+08:00 - Author: Allen A modern pendant light for a kitchen island is usually hung with the bottom of the shade **30 to 36 inches above the countertop**, and the answer to “3 heads or 5 heads” depends on the surface length more than on style. As a rule of thumb: one 3-head cluster suits islands and tables up to roughly 6 feet long, while a 5-head cluster reads better over 7-foot-and-longer surfaces or open dining tables where you want a wider visual footprint. Both versions in this MiniHouzz collection share the same slim-cylinder language — gold, chrome, or black tubes suspended around a central sphere — so the choice is mostly about scale, sightline, and how much of the ceiling plane you want the fixture to occupy. ## What this fixture actually is The Fulcrum-style cluster is built from three or five slim cylinders arranged around a central sphere, with the arms acting as both structure and ornament. It is a boutique- hotel idea executed at residential scale: narrow verticals instead of a big drum or globe, so the fixture stays visually light even when it is physically large. Materials are listed as **metal, glass, and aluminum**, which is a sensible combination for this shape — the aluminum and metal carry the frame and canopy, while the glass cylinders keep the light soft and non-glare. The fixture is hardwired for ceiling mounting, runs on **AC 110–240V**, and is offered in black, chrome, and gold finishes. It is rated **IP20 damp-rated**, meaning indoor use where it is not exposed to direct moisture. [⌊Three-head slim cylinder pendant light in gold suspended over a kitchen island⌉⌊ Three-head slim cylinder pendant light in gold suspended over a kitchen island⌉[ ## 3-head or 5-head: match the fixture to the surface The two configurations are not just different sizes — they are different gestures. A 3-head cluster is a punctuation mark; a 5-head cluster is a composition. Choose based on the length of what sits underneath it and how far away people will view it from. | Configuration | Fixture size | Best fit | | 3-head | Approx. 9.9 in diameter × 59 in overall hanging length | Islands and dining tables up to about 6 ft; galley kitchens; rooms where the fixture is seen up close | | 5-head | Approx. 11.8 in diameter × 59 in overall hanging length | Islands and tables 7 ft and longer; open-plan dining; double-height or vaulted rooms | Two details worth knowing before you decide. First, the overall diameter difference is modest — roughly two inches — because the heads sit in a tight cluster, not spread across the ceiling. The 5-head version reads larger mainly through density and the wider silhouette, not through a dramatically wider spread. Second, if your island runs past about 8 feet, a single cluster starts to look stranded; two 3-head fixtures spaced along the run is usually a better composition than one 5-head. [⌊Five-head black cylinder pendant light above a dining table⌉⌊Five-head black cylinder pendant light above a dining table⌉[ ## How high to hang it, and how much cable you will use Hanging height is the single most common mistake with cluster pendants. The fixture is tall — the cylinders are long, and the cluster hangs from a 59-inch cable — so a fixture mounted at the wrong drop can either crowd the sightline or float too high to read as a focal point. * **Over a kitchen island:** 30–36 inches from the countertop to the lowest point of the fixture. Use the lower end for ceilings at or below 8 ft, and the higher end if your household is tall or the island doubles as a prep-and-serve surface. * **Over a dining table:** 30–34 inches from the tabletop to the lowest point. Hang lower (30–32 in) for intimate, warm dining light; higher (33–34 in) if the table is also used for homework, laptops, or crafts. * **Clear the sightline:** from the main doorway into the room, you should not see the bottom of the fixture below eye level. If you do, raise it 2–3 inches. * **Budget the cable:** the adjustable hanging length is 59 inches (149.9 cm), so a standard 8 ft ceiling with a 36 in counter leaves roughly 27–33 inches of drop to play with after the canopy. On 9–10 ft ceilings you will use most of the cable, and the listing notes that an extension may be available — confirm before ordering. [⌊Close-up of gold and glass cylinder pendants with a central sphere detail⌉⌊Close- up of gold and glass cylinder pendants with a central sphere detail⌉[ ## Spacing and placement Because the heads are clustered rather than fanned out, you center one fixture on the island or table rather than spacing individual pendants. Three practical rules that hold up in real kitchens: * **Center on the surface, not the room.** Align the canopy with the centerline of the island or tabletop; an off-center fixture is the first thing the eye catches. * **Keep the canopy off the sink and cooktop.** Aim for ceiling placement behind the island’s working edge, so the fixture lights faces and plates rather than casting your shadow onto the counter. * **Watch the walkway.** The lowest point should sit at least 78 inches above the floor in any path people walk through — usually automatic once the 30–36 inch counter clearance is respected, but worth checking on low ceilings. ## Bulbs, base type, and color temperature The fixture takes **G9 base bulbs** and is described as compatible with LED or Edison- style bulbs. G9 is a small bi-pin base, so the bulbs sit neatly inside slim glass cylinders — which is exactly why this design works without bulky shades. Two honest caveats. The listing does not state a maximum wattage per socket, so confirm that with support before installing high-output bulbs. And the control description specifies compatibility with **standard wall switches**; if dimming matters to you, verify dimmer and bulb compatibility before you buy rather than after. For color temperature, match the room’s job: * **2700K** — warm, hospitality-grade light for dining rooms and evening entertaining. * **3000K** — a cleaner white that still feels residential; the safer default for islands used for prep. * **Avoid mixing.** Keep every bulb in the cluster at the same CCT, or the fixture will look mismatched head to head. ## Black, chrome, or gold: choosing a finish All three finishes are architectural rather than decorative, and each does something different to a room: * **Black** — the most graphic option. It draws the eye and holds its own against dark cabinetry, black window frames, and industrial materials. * **Chrome** — the most reflective. It nearly disappears against white ceilings and light stone, and it flatters cool-toned kitchens. * **Gold** — the warmest. It picks up brass hardware, oak, and warm white walls, and it is the finish that most reads as boutique-hotel. If your kitchen already has two metals, choose the finish that matches the _lighting- age_ metal (faucet, cabinet pulls) rather than the appliance metal. Stainless appliances are deliberately neutral; the fixture should follow the hardware. ## Installation and electrical notes This is a hardwired ceiling fixture, not a plug-in, so plan on a junction box at the mounting point and a licensed electrician for the connection. A few things to confirm before the electrician arrives: * **Ceiling structure.** The canopy needs a box rated for fixture weight; cluster pendants are heavier than a single-shade pendant of the same visual size. * **Voltage.** AC 110–240V means it works on US 120V circuits without a transformer. * **Location.** IP20 damp-rated is indoor, away from direct moisture — fine over an island or table, not a choice for a shower or covered porch. * **Compliance paperwork.** The listing states UL, ETL, CE, and SAA listing along with RoHS and FCC compliance; your electrician will want to see the markings on the fixture itself. [⌊Chrome slim cylinder pendant light installed in a bright modern interior⌉⌊Chrome slim cylinder pendant light installed in a bright modern interior⌉[ ## Specifications | Item | Detail | | Materials | Metal, glass, aluminum | | Finishes | Black, chrome, gold | | Light source | LED or Edison bulb, G9 base (bulbs not included) | | Voltage | AC 110–240V | | Mounting | Ceiling, hardwired | | Control | Standard wall switch (not included) | | Hanging length | 59 in / 149.9 cm adjustable cable; extension may be available | | Individual cylinder | Approx. 2.4 in diameter (6.1 cm); height listed as both 13.8 in (35 cm) and 11.8 in (30 cm) — confirm with support | | 3-head fixture | Approx. 9.9 in diameter × 59 in overall | | 5-head fixture | Approx. 11.8 in diameter × 59 in overall | | Environment | Indoor, IP20 damp-rated | | Listings | UL, ETL, CE, SAA; RoHS and FCC per listing | _Note: dimensions can vary slightly with manual measurement, and colors and color temperatures may shift a little between photography, monitor calibration, and production batches._ ## FAQ ### How many heads do I need over a 6-foot island? One 3-head cluster. A 6-foot island is at the upper edge of comfortable for a single small cluster; past about 7 feet, move to the 5-head, and past 8 feet, consider two 3-head fixtures spaced along the run instead of one wider fixture. ### What bulbs does it take, and are they included? G9 base LED or Edison-style bulbs. The listing does not include them, and it does not publish a maximum wattage per socket — confirm that with [MiniHouzz support](https://minihouzz.com/products/minihouzz-modern-pendant-light-kitchen-island-dining-room/) before buying high-output bulbs. ### Can it be used in a bathroom or outdoors? No. The fixture is IP20 damp-rated for indoor use where it is not exposed to direct moisture. It is suited to dining rooms, kitchens, living rooms, bedrooms, and similar interiors. ### Will it work on a standard US ceiling? Yes — the fixture accepts AC 110–240V and mounts to a ceiling junction box. The 59-inch adjustable cable covers most 8–10 ft ceilings; if yours is taller, ask about the optional extension before ordering. ### Is the light dimmable? The listing describes control via a standard wall switch and does not make a dimming claim, so dimming depends on the bulb and dimmer you pair with it. Verify compatibility first if dimming is a requirement. ## The short version For most kitchens, the decision comes down to three numbers: surface length (under 6 ft favors 3 heads, 7 ft and up favors 5), counter clearance (30–36 inches), and ceiling height (59 inches of cable is generous at 8–10 ft and tight above that). Pick a finish that matches the hardware rather than the appliances, keep every bulb in the cluster at the same color temperature, and confirm the socket wattage and dimming question before installation day. [See the MiniHouzz Fulcrum pendant light in black, chrome, and gold — in 3-head and 5-head configurations.](https://minihouzz.com/products/minihouzz-modern-pendant-light-kitchen-island-dining-room/) ## 17.3-Inch Resin Flush Mount Ceiling Light: A Room-by-Room Guide - Link: https://minihouzz.com/17-inch-resin-flush-mount-ceiling-light-guide/ - Published: 2026-11-12T09:31:19+08:00 - Author: Allen A 17.3-inch (44 cm) resin flush mount ceiling light is the middle size in most residential lighting plans: wide enough to light a bedroom or a small living room on its own, shallow enough at 3.5 inches (9 cm) to sit close to the ceiling without stealing headroom. This one pairs a moulded resin body with an acrylic diffuser and an integrated LED module available in 3000K, 4500K or 6000K, in white, green or beige. Two specs decide whether it works for you, and it is worth knowing them before anything else: the fixture is **not dimmable**, and it carries an **IP20** rating, which means dry indoor locations only — no bathrooms, no laundry rooms, no covered porches. If either of those is a dealbreaker, stop here. If not, the rest of this guide covers how the materials behave, how to choose the color temperature, and where a 44 cm flush mount actually belongs. ## What the resin-and-acrylic build means in practice The body is resin, finished by spray paint after moulding and cutting. Resin is the reason this fixture can hold a soft, rounded Scandinavian silhouette at a comparatively light 3 kg (6.6 lbs) — a comparable ceramic or cast-metal body of the same diameter would be heavier and would need sturdier ceiling anchoring. The trade-off is that resin is a composite, not a metal: it tolerates normal indoor humidity but should not be expected to handle steam or splashing, which is consistent with the IP20 rating. The diffuser is acrylic, and that is the part you actually look at. Acrylic spreads the output of the integrated LED across the full 17.3-inch face instead of letting a hot spot bloom in the middle, which is why the manufacturer describes the light as shadow-minimizing and easy on the eyes. In a bedroom or a home office where you glance up from a screen, a diffused face matters more than raw output. Three finishes are offered — white, green and beige. White disappears against a standard ceiling and is the safe default for resale-friendly interiors. Beige reads warmer and softer against off-white plaster and wood trim. Green is the deliberate choice: it works best as the single accent in an otherwise neutral room rather than repeated across a whole hallway. [⌊Resin flush mount ceiling light with acrylic diffuser, 17.3-inch diameter, mounted on a ceiling⌉⌊Resin flush mount ceiling light with acrylic diffuser, 17.3-inch diameter, mounted on a ceiling⌉[ ## Choosing between 3000K, 4500K and 6000K The integrated LED ships with three color temperature options, and this is the single decision that most changes how the room feels. As a working rule: * **3000K (warm)** — bedrooms, reading corners, dining areas, and any room where the light is on in the evening. It keeps skin tones and wood finishes looking natural. * **4500K (neutral)** — the most flexible option. Good for living rooms that double as work spaces, kitchens adjacent to living areas, and rental units where you cannot predict how the room will be used. * **6000K (cool)** — closets, utility corridors, home offices and task-heavy spaces. Crisper contrast, but in a bedroom at night it reads clinical. One caution on mixing: if a hallway has three of these and one is set to 6000K while the others run 3000K, the odd one out is immediately obvious. Set every fixture in a sightline to the same color temperature before installation, not after. ## Where a 44 cm flush mount fits, room by room ### Bedrooms A 17.3-inch diameter is a sensible single-light solution for a primary bedroom up to roughly 12 x 12 ft, and generous for a guest room. Center it on the room, not on the bed — centering on the bed looks correct only until furniture moves. At 3.5 inches of drop it clears wardrobe doors and ceiling fans comfortably. ### Living rooms and open-plan areas In a small living room or a seating zone within an open plan, one 44 cm fixture works as ambient light over the conversation area while floor and table lamps carry the task load. In a large open plan, plan on a row of two or three rather than one larger fixture — a single 17.3-inch light in a 20-foot room leaves visible dark corners, and the flush profile makes multiples read as a deliberate rhythm rather than clutter. As a starting point for spacing multiples, many designers use roughly 1.5 times the ceiling height in feet as center-to-center distance, then adjust for furniture layout. Treat that as a first pass to mark on the ceiling with tape, not a final answer. [⌊Close view of the acrylic diffuser on the 17.3-inch resin flush mount ceiling light⌉⌊Close view of the acrylic diffuser on the 17.3-inch resin flush mount ceiling light⌉[ ### Closets, hallways and home offices This is where the flush profile earns its keep. In a walk-in closet, the 3.5-inch drop clears shelving returns and hanging rods. In a hallway, spacing fixtures evenly along the run is more comfortable than pooling light at one end. In a home office, set the fixture slightly in front of the desk rather than directly overhead so the diffused face is not in your field of view all day — and choose 4500K or 6000K if the room is used for detail work during daylight hours. ### Where it should not go Not in a bathroom, shower room, laundry room, or any damp or wet location — IP20 rules those out. Not outdoors or on a covered porch, even under a roof. And because it is push-button on/off only, it is the wrong fixture for a room where you want scene control or dimming for movie nights; plan a dimmable alternative there instead of trying to add a dimmer downstream. ## Specifications | Spec | Detail | | Dimensions | Dia 44 cm x H 9 cm / 17.3 in x 3.5 in | | Light source | Integrated LED, no bulb required | | Color temperature | 3000K warm / 4500K neutral / 6000K cool | | Voltage | AC 110-240V | | Mounting | Ceiling, flush | | Materials | Resin body, acrylic diffuser | | Finish process | Spray paint, mould, cutting | | Finishes | White, green, beige | | Control | Push-button switch, not dimmable | | Driver | Included / required: yes | | Weight | 3 kg / 6.6 lbs | | IP rating | IP20, dry indoor locations | | Certification | UL Certified, ETL Listed, CE Approved, RoHS Compliant, FCC Certified | The listing quotes wattage in two places (24 W alongside the size line and 10 W in the specification notes). If you need an exact figure for circuit load or an energy calculation, confirm it with MiniHouzz support before ordering rather than relying on this page. Lumen output and CRI are not published in the product data, so this guide makes no claims about them. [⌊Side profile of the shallow 3.5-inch resin ceiling light showing the flush mounting depth⌉⌊Side profile of the shallow 3.5-inch resin ceiling light showing the flush mounting depth⌉[ ## Flush mount vs semi-flush vs pendant: a quick comparison | Type | Drop below ceiling | Best for | Watch out for | | Flush mount (this fixture) | ~3.5 in / 9 cm | Low ceilings, bedrooms, closets, hallways, circulation space | Little visual drama; not dimmable in this model | | Semi-flush | ~8-14 in | Standard 8-9 ft ceilings, dining nooks | Can crowd door swings in tight rooms | | Pendant | 18 in and up | Islands, dining tables, stairwells | Needs ceiling height and a defined furniture anchor | If the ceiling is under 8 ft, flush mount is usually the correct family. If it is 9 ft or more and there is a table underneath, a pendant earns the space better. ## Installation notes worth reading before you buy * **Voltage:** rated AC 110-240V, so it is compatible with standard North American 120V household circuits. Installation should be done by a qualified electrician, particularly where a new ceiling box is needed. * **Ceiling box capacity:** at 3 kg / 6.6 lbs the fixture is light, but the box must still be rated for a ceiling luminaire. In older homes, verify the box rather than assuming. * **Switching:** the fixture is controlled by a push-button switch with on/off only. If the wall already has a dimmer, replace it with a standard switch — do not leave a dimmer in circuit ahead of a non-dimmable driver. * **Color temperature setting:** set it at installation. Changing it later means going back up a ladder. * **Clearance:** check closet shelving and cabinet doors against the 9 cm drop before drilling. [⌊Resin flush mount ceiling light with acrylic diffuser, 17.3 inch, in a neutral interior⌉⌊Resin flush mount ceiling light with acrylic diffuser, 17.3 inch, in a neutral interior⌉[ ## Frequently asked questions ### Is this ceiling light dimmable? No. It operates through a push-button switch for on/off control only. If dimming is a requirement, choose a different fixture rather than adding a dimmer to this one. ### Can it go in a bathroom or a damp location? No. The IP20 rating covers dry indoor locations only. Bathrooms, laundry rooms, basements with moisture and covered outdoor areas are all outside its rating. ### Does it need a bulb or a separate driver? Neither. The LED is integrated and the driver requirement is stated as yes/included, so the fixture is self-contained. There is nothing to source separately. ### How much area will one 17.3-inch fixture light? The product data does not publish lumen output, so any square-footage number would be guesswork. In practice, one unit handles a single bedroom or a small living zone; for open plans, use two or three in a row rather than stretching one fixture. ### What is the difference between the white, green and beige versions? Finish only — the dimensions, LED module, color temperature options and IP20 rating are shared across all three. Choose white to blend with the ceiling, beige for warmer neutral interiors, green as a deliberate accent. ## Who this fixture suits It is a good fit for a low-ceiling bedroom, a walk-in closet, a hallway run, or a home office where you want an even, diffused light that stays out of your sightline— and where on/off control is enough. It is the wrong choice for a damp room, a room that needs dimming, or a large space expecting one fixture to do everything. Available in white, green and beige with your choice of 3000K, 4500K or 6000K — [see the 17.3-inch resin flush mount ceiling light at MiniHouzz](https://minihouzz.com/products/modern-resin-ceiling-light-acrylic-diffuser-17-inch/), where expedited shipping and custom requests can be arranged through the support team. If you are matching several fixtures across rooms or need a lighting layout reviewed before you order, [start from the product page](https://minihouzz.com/products/modern-resin-ceiling-light-acrylic-diffuser-17-inch/) and ask the design consultants directly. ## Pink Glass Chandelier in Gold: 3-Light vs 5-Light Sizing Guide - Link: https://minihouzz.com/pink-glass-chandelier-gold-3-vs-5-light-guide/ - Published: 2026-11-11T20:33:08+08:00 - Author: Allen A pink glass chandelier with a gold finish reads soft and warm rather than sweet, which is why it works in grown-up dining rooms and foyers that need a focal point without a heavy brass statement. This fixture comes in two sizes, and the choice is mostly arithmetic. The **3-light version measures 18.1 inches across (46 cm)** and suits a dining table up to roughly 60 inches wide or a compact foyer. The ** 5-light version measures 26.4 inches across (67 cm)** and is the better fit for tables from 60 to 84 inches and for open two-story entries. Everything below is what you need to decide before ordering: diameter against your table, hanging height, drop from the three suspension rod sections, bulb choice, and the one installation detail that catches people out on sloped ceilings. ## Design: soft pink glass on a gold branch frame The shade is hand-finished pink glass, paired with an iron and metal branch frame in a gold-toned finish. The shades are open at the base, so light spills downward onto the table and sideways through the glass, which gives the piece its glow instead of a hard pool of light underneath. [⌊Pink glass chandelier with gold branch arms viewed from a low angle in a dining room⌉⌊Pink glass chandelier with gold branch arms viewed from a low angle in a dining room⌉[ Because the glass is sprayed rather than dipped, MiniHouzz notes that slight variations in pink tone between individual shades are normal. Plan for that as part of the character of the piece, not a defect. If a perfectly uniform shade-to-shade color is the priority, a single-shade fixture will serve you better. ## 3-light vs 5-light: which size for which room Use the fixture diameter against the table, not against the room. A chandelier should take up roughly one half to two thirds of a dining table’s width, leaving at least 12 inches of clear table edge on each side so nobody’s sightline is blocked across the table. | Spec | 3-light | 5-light | | Diameter | 18.1 in / 46 cm | 26.4 in / 67 cm | | Body height | 11.0 in / 28 cm | 13.4 in / 34 cm | | Shade diameter | 7.1 in / 18 cm each | 7.1 in / 18 cm each | | Best table width | Up to about 60 in | About 60–84 in | | Best for | Compact dining rooms, breakfast nooks, small foyers, bedrooms | Standard to large dining tables, open foyers, restaurant-style settings | | Visual weight | Light and airy | Fuller, more of a centerpiece | A practical rule for the 5-light: it needs about 30 inches of clearance from the table edge to walls or tall furniture on all sides, otherwise it starts to crowd the room visually even if it physically fits. ## How high to hang it Over a dining table, set the bottom of the shades **30 to 36 inches above the tabletop**. Thirty inches keeps the fixture intimate over a low table; go toward 36 inches if the room has high ceilings, if people stand and move around the table, or if the fixture is wider than 24 inches. [⌊Close view of pink glass shades and gold metal branches on the chandelier⌉⌊Close view of pink glass shades and gold metal branches on the chandelier⌉[ In a foyer, the number that matters is head clearance: the lowest point of the fixture should sit at least 7 feet above the finished floor. In a two-story entry, a common starting point is roughly 2.5 to 3 inches of fixture height per foot of ceiling height, then confirm the 7-foot clearance still holds. ### Working out the drop The suspension rod ships in three sections: 3.9 in (10 cm), 7.9 in (20 cm) and 11.8 in (30 cm), adjustable during installation. That gives a maximum of about 23.6 inches of rod, plus the body height. Measure from the ceiling to your target bottom height, subtract the body height, and you have the rod length you need. If the result is shorter than 3.9 inches, this fixture is not the right one for that spot. ## Installation details that decide the job This is a hardwired, ceiling-mounted fixture. Before ordering, confirm three things: * **Junction box:** the fixture mounts to the ceiling box, so the box has to be rated for the weight. If you are replacing a lightweight flush mount, have an electrician check it. * **Ceiling slope:** sloped ceilings are supported, but only with a universal head accessory, which is sold separately. Flat-ceiling installs need nothing extra. * **Switch:** it works with common wall switches (not included). Dimming only works if both the bulbs and the switch are dimmable. It is rated IP20, which means indoor use where it is not exposed to moisture. Do not put it in a bathroom, above a shower, or on a covered porch where humidity and damp air reach it. [⌊Five-light pink glass chandelier installed above a dining table with warm light⌉⌊ Five-light pink glass chandelier installed above a dining table with warm light⌉[ ## Bulbs and light quality The sockets take E26 or E27 base bulbs, LED or Edison style, and bulbs are not included. The fixture is rated for AC 110–240V, so it works on US 120V circuits and on 220– 240V markets without a transformer. For a dining room, 2700K to 3000K is the range that keeps the pink glass looking pink rather than grey. Clear or amber Edison bulbs flatter the branch frame; frosted LED globes give a softer, more even wash across the table. Match the count to the fixture: three bulbs on the 3-light, five on the 5-light. If you want a dimmable scene, buy dimmable bulbs in one batch so the color temperature matches across all sockets. ## Finishes, materials and care Body finish options are copper and chrome; shade options are white, pink and cream. Materials are iron, metal and glass. The fixture is listed as UL, ETL, CE and SAA compliant, and the manufacturer also lists RoHS and FCC compliance. [⌊Detail of the gold branch frame and glass shade connection on the chandelier⌉⌊ Detail of the gold branch frame and glass shade connection on the chandelier⌉[ Care is simple: dust the frame with a dry microfiber cloth, and clean the glass with a soft damp cloth and mild soap, drying immediately. Avoid ammonia-based glass cleaners on the finish, and do not spray cleaner directly onto the sockets. ## Before you order: a five-point check 1. Table width measured in inches — compare it to the 18.1-inch and 26.4-inch diameters. 2. Ceiling height and your target bottom height, so you know if 23.6 inches of rod is enough. 3. Ceiling type — flat, or sloped and needing the universal head accessory. 4. Junction box rating at the mounting point. 5. Bulb plan — base type, color temperature, dimmable or not, and quantity. The full spec sheet, finish options and current pricing are on the [pink glass and gold chandelier product page](https://minihouzz.com/products/pink-glass-gold-chandelier-3-5-light-dining-foyer/). Both sizes are the same design family, so if you are lighting an open-plan dining and living area, the 5-light over the table plus the 3-light in a nearby hall keeps the look continuous. ## Frequently asked questions ### Can this chandelier go on a sloped ceiling? Yes, with a universal head accessory that is sold separately. On a flat ceiling it mounts directly to the ceiling box with no extra parts. ### What bulbs does it take, and are they included? E26 or E27 base bulbs, LED or Edison style. Bulbs are not included, so plan for three on the 3-light and five on the 5-light. ### Is the suspension rod adjustable? Yes. It comes in three sections — 3.9 in, 7.9 in and 11.8 in — and can be shortened during installation to set the drop. ### Can it be used in a bathroom? No. It is IP20 rated for indoor use away from moisture, so bathrooms and other high- humidity rooms are out. ### Will the pink shades match each other exactly? Not perfectly. The glass is sprayed, so slight tone variation between shades is normal and part of the hand-finished look. ### Which size should I choose for a 72-inch dining table? The 5-light. At 26.4 inches across it takes up a sensible share of a 72-inch table, while the 18.1-inch 3-light would look undersized over that width. ## The short version Pick the 3-light for tables up to about 60 inches or a compact foyer, and the 5- light for 60–84 inch tables and open entries. Hang the bottom of the shades 30–36 inches above the tabletop, keep 7 feet of clearance in a foyer, use E26/E27 dimmable bulbs around 2700–3000K, and order the universal head accessory if your ceiling is sloped. [See the pink glass chandelier in gold — 3-light and 5-light options](https://minihouzz.com/products/pink-glass-gold-chandelier-3-5-light-dining-foyer/) ## Flush Mount LED Ceiling Light: Iron & Acrylic Guide - Link: https://minihouzz.com/flush-mount-led-ceiling-light-iron-acrylic-guide/ - Published: 2026-11-11T14:31:29+08:00 - Author: Allen A flush mount LED ceiling light sits almost flat against the ceiling — this one measures just 5 cm (1.9 in) deep — so it lights a room without taking visual space from it. If you are choosing one for a bedroom, hallway, or low-ceiling room, the three decisions that matter are diameter, color temperature, and how the diffuser handles glare. Everything else is finish. This guide walks through the iron-and-acrylic construction of the [Modern Iron Ceiling Lamp with Acrylic Shade](https://minihouzz.com/products/modern-iron-ceiling-lamp-acrylic-shade-integrated-led-flush-mount/), the sizing math for 40 cm, 50 cm, and 60 cm versions, and the practical install details — including the one limitation most buyers miss: this fixture is IP 20 and not dimmable. ## What “flush mount” means, and when it is the right call A flush mount fixture mounts directly to the ceiling with no stem, chain, or drop. Nothing hangs below the canopy. That single fact drives most of its advantages: it clears door swings, keeps sightlines open in narrow hallways, and works in rooms where a pendant would sit too close to eye level. It is the right call when: * **Ceiling height is under 2.4 m (8 ft).** A pendant or chandelier in this range tends to crowd the room. * **The room needs even ambient light, not a focal point.** Bedrooms, hallways, laundry rooms, walk-in closets, small home offices. * **You want a clean ceiling line.** The 5 cm profile reads as part of the ceiling rather than an object on it. It is the wrong call for a double-height entry, a dining table that wants a centered pendant, or any space where the fixture is meant to be the design statement. [⌊Modern iron flush mount LED ceiling lamp with white acrylic shade⌉⌊Modern iron flush mount LED ceiling lamp with white acrylic shade⌉[ ## Design and materials: iron body, acrylic diffuser The housing is **iron and metal**; the diffuser is **acrylic**. That combination is deliberate. Iron gives the canopy structural rigidity and a crisp edge that thin stamped steel cannot hold, which is why the disc stays flat and even across a 60 cm span. Acrylic spreads the LED output into a soft, uniform glow instead of the hot spot you get from an exposed board or a bare polycarbonate cover. Two finishes are available — **white** and **green** — both with a white shade. White on white disappears into a standard ceiling and is the safe choice for resale- neutral interiors. Green is the more intentional pick: it works as a low-contrast accent against warm white ceilings and pairs well with natural materials like oak, rattan, and linen. Because the LED is integrated, there is no bulb to match and no socket to align — the trade-off is that the light source cannot be replaced. That is normal for a sealed architectural fixture, but it should factor into your decision if you expect to swap color temperatures later. ## Which diameter: 40 cm, 50 cm, or 60 cm? The fixture comes in three diameters, all 5 cm deep. As a working rule for ambient lighting, add the room’s length and width in feet and treat the total as the minimum combined wattage you need — then size the fixture to the ceiling area rather than the wall area. In practice: | Diameter | Best for | Typical rooms | | 40 cm / 15.7 in | Single small room, tight ceiling | Hallway, walk-in closet, small bath-adjacent dressing area, 6–8 m² | | 50 cm / 19.6 in | Most bedrooms, standard secondary rooms | Bedroom 10–14 m², study, laundry room | | 60 cm / 23.6 in | Larger rooms, or one fixture instead of two | Primary bedroom 15–20 m², open hallway run, living area supplement | If you are lighting a corridor longer than about 4 m, two 40 cm fixtures spaced evenly will read better than one 60 cm fixture in the middle — the goal is to avoid a single bright pool with dark ends. [⌊Low-profile iron ceiling lamp shown with its white acrylic diffuser⌉⌊Low-profile iron ceiling lamp shown with its white acrylic diffuser⌉[ ## Color temperature: 3000K, 4000K, or 6000K The fixture is offered in three fixed color temperatures. Pick one at order time— it is not switchable afterward. | Option | Character | Choose it for | | 3000K warm | Yellow-leaning, relaxing | Bedrooms, evening-use living spaces, anywhere you want to wind down | | 4000K neutral | Clean white, minimal cast | Hallways, closets, laundry, home office — the most versatile default | | 6000K cool | Crisp, slightly blue | Task areas, utility rooms, spaces that need high perceived brightness | A common mistake is putting 6000K in a bedroom because it looks “brighter” in a showroom. Cool white at ceiling level suppresses the warm, dim feel most people want at night. For a bedroom, 3000K is almost always the better answer; save 6000K for the garage-adjacent hallway or the utility room. If a room already has warm 2700K lamps in table fixtures, 3000K on the ceiling will blend; 4000K will visibly separate. Match or step one level, no more. ## Installation: height, wiring, and switch compatibility This is a **hardwired** ceiling fixture, so it needs an existing junction box and a wall switch — it is not a plug-in. It works on **AC 110–240V**, which covers US 120V circuits as well as 220–240V regions. Practical notes: * **Mounting height is fixed by the ceiling** — at 5 cm deep, the fixture clears standard 2.03 m (80 in) door swings even in an 8 ft room. * **Switch type:** it is designed for common push (on/off) switches, not included. It is **not dimmable**, so a dimmer on the circuit will only give you full-on or off. * **Centering:** in a hallway, center on the corridor width, not the door. In a bedroom, center on the room, not the bed — the bed moves, the ceiling does not. * **Two-fixture spacing:** for a long run, divide the corridor length by three and place fixtures at the one-third and two-thirds points. [⌊Iron flush mount ceiling lamp mounted close to a ceiling⌉⌊Iron flush mount ceiling lamp mounted close to a ceiling⌉[ ## Where it works — and the IP 20 limitation The rating is **IP 20**, damp-rated, indoor use only. That means it handles normal interior humidity but is not sealed against splashes or steam. Concretely: * **Fine:** bedrooms, hallways, entryways, closets, laundry rooms, home offices, covered interior stairwells. * **Not suitable:** bathrooms with a shower or tub, covered porches, saunas, anywhere the fixture would sit in direct steam or spray. If you need a bathroom ceiling light, look for an IP 44 or higher fixture instead. Using an IP 20 unit over a shower is a code and safety issue, not a style preference. ## Specifications at a glance | Light source | Integrated LED (not replaceable) | | Color temperature | 3000K / 4000K / 6000K (fixed at order) | | Voltage | AC 110–240V | | Dimensions | Ø40 × 5 cm · Ø50 × 5 cm · Ø60 × 5 cm | | Materials | Iron, metal, acrylic | | Finishes | White body / white shade · Green body / white shade | | Mounting | Ceiling, hardwired | | Control | Common push switch (not included); not dimmable | | Rating | IP 20, damp-rated, indoor only | | Listings | UL, ETL, CE, SAA listed; RoHS compliant; FCC certified | [⌊Acrylic-shade flush mount LED ceiling lamp in a modern interior⌉⌊Acrylic-shade flush mount LED ceiling lamp in a modern interior⌉[ ## Flush mount vs. the alternatives **vs. semi-flush mount:** semi-flush drops 15–30 cm below the ceiling. It gives more presence and a slightly softer spread, but it eats headroom. Under 2.4 m ceilings, flush wins. **vs. recessed downlights:** recessed cans give you many small pools of light and a truly invisible ceiling. Flush mount gives one continuous, even wash with no scalloping on the walls — and no cutting into drywall. In a bedroom, one 50 cm flush fixture usually reads calmer than four recessed cans. **vs. a pendant:** a pendant is a focal point. If the room already has strong architecture or artwork, a flush mount stays out of the way. If the room is empty and needs a focal point, a pendant is the better tool. ## Frequently asked questions ### Can this ceiling lamp be used in a bathroom? No. At IP 20 it is damp-rated for indoor use only and is not designed for high-moisture areas such as bathrooms with a shower or outdoor spaces. Use an IP 44 or higher fixture there. ### Is the LED replaceable? No — the integrated LED is built into the fixture and cannot be replaced. It is specified for long-term reliable performance, but plan for the fixture as a sealed unit. ### Can I use it with a dimmer? This lamp is not dimmable. It works with common push switches (not included) for standard on/off operation. A dimmer on the circuit will not modulate output. ### What color temperatures are available? Three: warm 3000K, neutral 4000K, and cool 6000K. The choice is made at order time and is not switchable afterward. ### Which size should I pick for a 12 m² bedroom? A 50 cm (19.6 in) diameter is the usual fit for a bedroom in the 10–14 m² range. Step up to 60 cm if the ceiling is white and the room also holds a desk or reading chair that needs more ambient fill. ## Bottom line Choose the [Modern Iron Ceiling Lamp with Acrylic Shade](https://minihouzz.com/products/modern-iron-ceiling-lamp-acrylic-shade-integrated-led-flush-mount/) if you want a low-profile, evenly diffused ambient light for a bedroom or hallway, and you are lighting a dry interior room on a standard on/off switch. Match the diameter to the room, pick 3000K for bedrooms and 4000K for circulation spaces, and confirm you are not putting it somewhere that needs an IP 44 rating. Need a custom diameter, a lighting layout for a longer corridor, or expedited shipping? The MiniHouzz design team handles those requests directly — [see the full specifications and finishes here](https://minihouzz.com/products/modern-iron-ceiling-lamp-acrylic-shade-integrated-led-flush-mount/). ## Bauhaus Glass Disc Ceiling Light: Wood Shade Flush Mount Guide - Link: https://minihouzz.com/bauhaus-glass-disc-ceiling-light-wood-shade-flush-mount-guide/ - Published: 2026-11-11T09:31:21+08:00 - Author: Allen This vintage Bauhaus glass disc ceiling light is an 11-inch flush mount built from glass and wood: a shallow disc diffuser over a natural wood-toned shade, mounted flat to the ceiling at 7.9 inches deep. It takes a standard E26 or E27 bulb — LED or Edison, not included — and is hardwired to a wall switch. The short answer on fit: it works as the primary light in rooms up to roughly 10 × 10 feet, suits standard and lower ceilings where a pendant would crowd the room, is rated IP20 for damp indoor spaces such as bathrooms, and is **not** dimmable. ## What Makes It a Bauhaus Piece, Not Just a Round Flush Mount The Bauhaus reference is structural, not decorative. There is no ornament here — the design is a glass disc, a wood ring, and a flat ceiling plate. That restraint is what lets the fixture sit in a mid-century bedroom, a modern dining room, or a converted gallery space without fighting the room. The material pairing does most of the work. Glass diffuses the bulb into an even field of light rather than a hot spot, while the natural wood shade adds a warm, matte counterweight to the cool sheen of the glass. In practice that means the fixture reads warm even with a neutral bulb, which is why it tends to look better over a dining table than a bare metal dome of the same size. Finish options are white and orange body with a natural wood-colored shade. White disappears into a pale ceiling and keeps attention on the light itself; orange becomes a deliberate accent and holds its own against warm woods, terracotta, and mid-century walnut furniture. [⌊Vintage Bauhaus glass disc ceiling light in white with a natural wood shade, mounted flush to a bedroom ceiling⌉⌊Vintage Bauhaus glass disc ceiling light in white with a natural wood shade, mounted flush to a bedroom ceiling⌉[ The glass disc diffuser spreads light evenly instead of pooling it under the fixture. ## Where This 11-Inch Flush Mount Actually Belongs Because the fixture is 28 cm (11 inches) across and only 20 cm (7.9 inches) deep, it is a low-ceiling solution first and a statement piece second. Here is how it plays out room by room, based on the manufacturer’s listed indoor, IP20 damp-rated specification. * **Bedroom:** the strongest use case. A flush mount removes the visual clutter a pendant adds at eye level when you are lying in bed, and the diffused glass keeps the light soft at the edges of the room. * **Dining room:** works well over a compact table, particularly in apartments where a hanging fixture would block sightlines across the room. If your table seats six or more, treat this as a layering piece rather than the only light. * **Bathroom:** IP20 damp-rated means it tolerates humidity, so it is suitable for a bathroom ceiling — but it is not waterproof and should not sit in a shower enclosure or anywhere with direct water contact. * **Hallway, entry, bar, gallery:** all listed as suitable by the manufacturer. In a hallway, a run of these at consistent spacing looks intentional in a way a single fixture rarely does. [⌊Bauhaus style glass and wood flush mount ceiling light shown in a dining room setting⌉⌊Bauhaus style glass and wood flush mount ceiling light shown in a dining room setting⌉[ Over a compact dining table, the flush profile keeps the room open. ## Sizing, Height, and Spacing: The Practical Numbers ### How big a room will one 11-inch fixture light? A long-standing rule of thumb for a room’s main ceiling fixture is to add the room’s width and length in feet and read that number as the fixture diameter in inches. An 11-inch fixture therefore lines up with rooms up to about 10 × 10 feet as the primary light. In anything larger, use it as one layer of a multi-fixture plan rather than the only source. For a hallway, space flush mounts roughly 8 to 10 feet apart and keep them centered on the corridor width. For a row of two or three over a kitchen island or a long dining table, keep the gaps equal — uneven spacing is the one thing the eye catches immediately. ### How much clearance do you need? Flush mounts are forgiving. With a standard 8 to 9 foot ceiling, the fixture leaves well over 7 feet of clearance to the floor, which is the threshold you want in any space people walk through. On a ceiling higher than 9 feet, a flush mount can start to feel small and disconnected; that is the point to consider a semi-flush or pendant instead. ### Wiring and switch requirements The fixture is hardwired and requires an external wall switch — the switch is not included, and the lamp is controlled by that switch rather than by a pull chain or in-line dimmer. Plan on a ceiling junction box at the fixture location. If you are not confident working at the breaker panel, this is an electrician job; the fixture is straightforward to hang, but the wiring is not a plug-in task. ## Bulb Choice: The Part Most People Get Wrong The manufacturer specifies flying saucer-style bulbs for this lamp. That matters because the glass disc sits close to the ceiling plate: a tall or wide bulb can protrude past the diffuser or crowd it. Check the bulb height against the fixture’s 7.9-inch overall depth before you order a pack. Beyond shape, the base is E26 or E27, so the fixture works on both North American and European wiring, and the driver-free design means any standard LED or Edison- style bulb in that base will run it. * **Color temperature:** 2700K for bedrooms and dining rooms where you want warmth; 3000K if the room also functions as a workspace and you need a cleaner white. * **Output:** for a small bedroom or dining room, somewhere in the region of 800 to 1,100 lumens from a single fixture is a reasonable starting point — then adjust for ceiling height, wall color, and how much light the room already gets from windows. * **Dimming:** this fixture is not designed for dimming. If dimming matters to you, plan a different fixture rather than a dimmer switch. * **Edison bulbs:** a visible filament bulb suits the glass disc if you like seeing the source through the glass. Frosted or opal bulbs give a more even, calmer wash instead. [⌊Close view of the wood shade and glass disc on the Bauhaus ceiling light with the bulb position visible⌉⌊Close view of the wood shade and glass disc on the Bauhaus ceiling light with the bulb position visible⌉[ The shallow disc sets the bulb close to the ceiling — flying saucer bulbs are the specified type. ## Specifications at a Glance | **Diameter** | 28 cm / 11 in | | **Height** | 20 cm / 7.9 in | | **Materials** | Wood and glass | | **Body finishes** | White, orange | | **Shade finish** | Natural wood color | | **Bulb** | E26 / E27, LED or Edison, flying saucer type, not included | | **Voltage** | AC 110–240V | | **Mounting** | Ceiling, hardwired | | **Moisture rating** | IP20 damp-rated, indoor use only, not waterproof | | **Dimming** | Not supported | | **Certifications** | UL certified, ETL listed, CE approved, SAA listed, RoHS compliant, FCC certified | Current price and finish availability are on the product page: [Vintage Bauhaus Glass Disc Ceiling Light](https://minihouzz.com/products/vintage-bauhaus-glass-disc-ceiling-light-wood-shade-flush-mount/). ## White or Orange: Choosing the Finish | **White body** | Best on pale ceilings and in calm, minimal bedrooms. Blends in; the glass and wood carry the design. | | **Orange body** | Best as an accent in mid-century rooms with walnut, teak, or terracotta. Reads warmer and more retro against white walls. | Both finishes ship with the natural wood-colored shade, so the difference is in the frame and body rather than the light color. If you are placing two or more in the same sightline — a hallway run, a pair over a table — match the finish and the bulb type, or the variation will read as a mistake. [⌊Orange Bauhaus glass disc flush mount ceiling light with wood shade against a white ceiling⌉⌊Orange Bauhaus glass disc flush mount ceiling light with wood shade against a white ceiling⌉[ Orange reads as an accent; white recedes into the ceiling. ## Care and What to Expect Over Time * Dust the glass disc with a dry microfiber cloth; the flat surface collects dust but is easy to reach compared with a pendant shade. * Keep liquid cleaners off the wood shade — wipe the wood with a dry or barely damp cloth and let it dry fully. * Because the fixture is IP20, avoid steam-heavy placement directly over a shower or in an uncovered outdoor spot. * Dimensions are subject to slight manual measurement variation, and finish or color temperature can look different between photos, monitor settings, and production batches. ## Frequently Asked Questions ### What bulb does this ceiling light need? A flying saucer-style bulb with an E26 or E27 base, in LED or Edison format. The bulb is not included, and the shallow disc means bulb shape matters as much as base type. ### Can it go in a bathroom? Yes — it is IP20 damp-rated and the manufacturer lists bathrooms as a suitable indoor setting. It is not waterproof, so keep it out of direct water contact and away from the immediate shower zone. ### Is it dimmable? No. The fixture is not designed for dimming and is controlled by an external wall switch, which is not included. ### Will it work on US wiring? Yes. It is rated AC 110–240V with an E26/E27 base and is UL certified and ETL listed, so it suits standard North American household voltage. Installation is hardwired and should be done at a ceiling junction box. ### How many do I need for a hallway? Space them about 8 to 10 feet apart, centered on the corridor, and keep the gaps equal. For a room larger than roughly 10 × 10 feet, treat each fixture as one layer of the lighting plan rather than the only source. ## Bottom Line If you want a low-profile ceiling light that looks considered rather than builder- grade, this glass disc flush mount earns its place: real materials, an honest Bauhaus silhouette, an 11-inch footprint that suits bedrooms and compact dining rooms, and UL/ETL/CE/SAA listing for safety. Decide the finish first, confirm your ceiling box and wall switch, then pick a flying saucer bulb in 2700K or 3000K to set the mood. [See the current listing and finish options here](https://minihouzz.com/products/vintage-bauhaus-glass-disc-ceiling-light-wood-shade-flush-mount/). ## Rattan Arch Pendant Light: Warm Natural Light for Dining Rooms - Link: https://minihouzz.com/rattan-arch-pendant-light-dining-room-guide/ - Published: 2026-11-10T20:31:55+08:00 - Author: Allen The **Rattan Arch Pendant Light** combines a curved metal frame, a handcrafted natural rattan shade, and solid wood body accents in a nature wood finish. It is built for people who want warm, filtered light over a dining table or kitchen island without the visual weight of an all-metal fixture. It comes in four configurations — one 7.9″ head, one 11.8″ head, a two-head 23.6″ run, and a three-head 27.6″ run — all with a 59″ adjustable cable and hardwired ceiling mounting. If you are deciding whether it works in your room, the answer usually comes down to three things: the size of the surface below it, your ceiling height, and whether your ceiling is flat or sloped. This guide covers all three, plus bulb choice and installation constraints, so you can order once and hang it right. ## Design and materials: what the fixture is actually made of Three materials do the work here, and each has a job: * **Metal frame** — carries the structure and the arch form. The curve is what separates this from a standard drum or dome pendant; it reads as architectural rather than decorative. * **Natural rattan shade** — handcrafted, which means open weave and slight irregularity are part of the material. Rattan diffuses light rather than blocking it, so you get a soft glow plus patterned shadows on the ceiling and wall. * **Wood accents** — nature wood finish at the body, tying the piece to oak, walnut and teak furniture rather than fighting it. The fixture is hardwired and ceiling-mounted. It is listed to UL, ETL, CE and SAA standards, and the manufacturer also states RoHS and FCC compliance. Those listings matter for two practical reasons: an inspector or electrician will want to see them, and they indicate the wiring and components were tested to a recognized standard rather than assembled to no spec at all. [⌊Rattan arch pendant light hanging over a dining table, showing the curved metal frame and woven rattan shade⌉⌊Rattan arch pendant light hanging over a dining table, showing the curved metal frame and woven rattan shade⌉[ One honest note on the rattan: natural woven shades vary slightly in tone and density from piece to piece, and the manufacturer notes that color can shift a little between batches and under photography lighting. If you are matching an existing rattan chair or basket exactly, expect a close match, not an identical one. ## Size options: matching the fixture to your surface This is where most people get it wrong — usually by ordering something too small for a long table. Here are the four configurations as listed: | Configuration | Dimensions | Typical fit | | 1 head, small | ∅ 7.9″ (20 cm) × H 59″ (150 cm) | Small dining nooks, breakfast bars, pairing two or three in a row over an island | | 1 head, large | ∅ 11.8″ (30 cm) × H 59″ (150 cm) | Round or square tables up to about four seats; a single statement over a small island | | 2 heads | L 23.6″ (60 cm) × H 59″ (150 cm) | Rectangular tables for four to six; short island runs | | 3 heads | L 27.6″ (70 cm) × H 59″ (150 cm) | Long rectangular tables for six to eight; full kitchen island runs | A working rule for scale: the fixture’s width should land somewhere around one-third to one-half of the table or island length beneath it. A 60″ table pairs comfortably with the 23.6″ two-head; a 72–84″ table with the 27.6″ three-head. On a very long island, two separate three-head fixtures spaced apart usually look more deliberate than one stretched arrangement. [⌊Two-head rattan pendant light installed above a kitchen island with wood cabinetry⌉⌊ Two-head rattan pendant light installed above a kitchen island with wood cabinetry⌉[ ## How high to hang it Every room is different, but these are the ranges that work in most North American homes. Measure and adjust rather than trusting a fixed number. ### Over a dining table A common starting point is 30–36″ from the bottom of the shade to the tabletop. Go toward 36″ if people will be seated across from each other and you want clear sightlines; go toward 30″ for a more intimate, lower glow. If your ceiling is above the standard 8 ft, raise the fixture so the visual gap between shade and ceiling does not get too large — otherwise the light feels stranded. ### Over a kitchen island Usually 30–36″ above the countertop. Keep the bottom of the fixture clear of the average person’s eye line when standing at the counter, and check that it does not block sightlines into the kitchen from the adjacent room. On an island with seating on one side only, centering the fixture over the counter — not over the walkway — is the safer choice. ### The cable All four sizes ship with a 59″ (149.9 cm) adjustable hanging cable, and the manufacturer states the cable can be lengthened if required. In practice a 59″ cable covers most 8–9 ft ceilings with room to shorten. For vaulted spaces or very high ceilings, confirm the extra length with the supplier before ordering rather than assuming you can splice it on site. ## Spacing and layout * **Multiple single-head fixtures in a row:** roughly 24–30″ of clear space between shades, and keep the outer fixtures about 30″ in from the ends of the island or table so the run does not look cut off. * **Odd numbers read better than even** in open sightlines — three small heads over a long island is a more forgiving composition than two. * **Align to the surface, not the ceiling.** If the table or island is offset in the room, center the fixture on the furniture. The eye reads the relationship between light and table first. * **Keep rattan out of direct afternoon sun** where possible. Natural fiber will fade with sustained UV exposure over years, which is normal for the material, not a defect. [⌊Close-up of the woven rattan shade and nature wood accent on the rattan arch pendant lamp⌉⌊Close-up of the woven rattan shade and nature wood accent on the rattan arch pendant lamp⌉[ ## Bulbs and color temperature The fixture takes LED or Edison-style bulbs on an E26 or E27 base and runs on AC 110–240V, so it works on standard North American 120V wiring without a transformer. It is controlled by a common wall switch (not included). * **Dining rooms:** 2700K warm white. Warm light makes wood and rattan read richer and is the usual choice for a room where people sit and talk for an hour. * **Kitchen islands:** 3000K is the practical compromise — still warm, but enough clarity to see what you are prepping. * **Avoid 4000K and above** in this fixture. Cool white through a warm rattan weave fights the material and makes the wood finish look gray. * **Edison bulbs** suit the exposed-bulb look better than frosted globes if the bulb is visible through the weave, which it will be from some angles. * **Dimming:** if you want dimmable output, use a dimmable bulb with a compatible dimmer. The fixture itself is switched, so the dimming capability comes from the bulb and switch combination, not the fixture. ## Installation: what to plan for This is a hardwired ceiling fixture, so it needs an existing junction box and, in most jurisdictions, a licensed electrician. A few constraints worth knowing before you buy: * **Sloped ceilings:** compatible, with an adaptable angle under 30°. Steeper pitches need a different canopy solution — confirm before ordering. * **Moisture rating:** IP 20, damp-rated for indoor use where the fixture is not exposed to moisture. That means dining rooms, kitchens and covered indoor areas— not bathrooms, shower zones, or exposed porches. * **Weight and mounting:** multi-head versions spread load across a wider canopy, so the junction box needs to be soundly fixed. Have the electrician check the box before installation day, not during. * **Indoor only.** The rattan weave is a natural fiber and is not intended for exterior exposure. [⌊Three-head rattan arch pendant light over a long wooden dining table in a bright dining room⌉⌊Three-head rattan arch pendant light over a long wooden dining table in a bright dining room⌉[ ## Does it fit your room? A quick checklist Run through this before you order — five yeses means it is a straightforward fit: 1. You have a ceiling junction box at or near the center of the table or island. 2. Your ceiling is flat or sloped less than 30°. 3. Ceiling height is roughly 8 ft or more once the fixture is hung at 30–36″ above the surface. 4. The room already has wood, cane, jute or linen tones — rattan plus nature wood sits naturally with those, and contrasts pleasantly against white walls and stone counters. 5. The space is indoors and not a wet zone. If you are weighing it against a metal or glass pendant: this one is softer and more forgiving. It hides bulb glare, throws patterned light, and does not dominate a small room the way a large metal shade can. The trade-off is that a woven shade delivers less downlight for the same wattage — if you need task-level brightness directly on a countertop, plan on slightly higher output or a second light source. ## Frequently asked questions ### What materials is the Rattan Arch Pendant Light made of? Metal, natural rattan and wood. The body has a nature wood finish and the shade is natural rattan, wrapped over a curved metal frame. ### Can it be installed on a sloped ceiling? Yes — it is sloped-ceiling compatible with an adaptable angle of less than 30°. It is designed for hardwired ceiling mounting. Anything steeper than 30° needs a different mounting approach, so confirm with the supplier first. ### What bulb does it take? LED or Edison bulbs on an E26 or E27 base, on AC 110–240V. It works with common wall switches, which are not included. ### Can the hanging height be adjusted? Yes. It ships with a 59″ (149.9 cm) adjustable hanging cable, and the manufacturer states the cable can be lengthened as required. Shorten it on site to set your height. ### Is it suitable for a bathroom? No. It is IP 20 and rated for indoor use where it will not be exposed to moisture. Bathrooms, shower zones and uncovered outdoor areas are out of scope. ### Which size should I pick for a six-seat table? For a rectangular table around 72–84″, the three-head 27.6″ version is the natural fit. For a table around 60″, the two-head 23.6″ version keeps the proportion right. For a round four-seat table, the single 11.8″ head is usually enough. [See the Rattan Arch Pendant Light in all four sizes →](https://minihouzz.com/products/rattan-arch-pendant-light-wood-dining-kitchen-island/) ## Schoolhouse Glass Pendant Light: A Vintage Shade Buying Guide - Link: https://minihouzz.com/schoolhouse-glass-pendant-light-vintage-shade-guide/ - Published: 2026-11-10T14:31:22+08:00 - Author: Allen A schoolhouse glass pendant light is a ceiling-hung fixture built around a rounded, opal-style glass shade that diffuses a bare bulb into a soft, even glow. If you are weighing one for a kitchen island or dining room, the short answer is this: it suits rooms that want warmth and a bit of nostalgia without visual clutter, and it works best when you size the shade to the surface below and pick a bulb that flatters glass rather than fights it. This guide covers how the fixture is built, how to place it, and what to decide before ordering. ## What Makes a Schoolhouse Shade Different The schoolhouse silhouette comes from early twentieth-century institutional lighting, where the priority was even, glare-free light across a wide area. The shape survives because it still does that job well in a home. Instead of throwing a hard cone of light downward, the rounded glass body spreads illumination outward and softens the edges, which is why these fixtures read as calm rather than dramatic. On this fixture the shade is glass paired with metal hardware. The glass is the design decision that matters most — it is what gives the piece its texture and makes it a focal point rather than a filler. The metalwork stays deliberately quiet so the shade carries the room. The pendant is available in two body finishes, beige and green. Both are period- appropriate; the choice is mostly about whether you want the fixture to blend into a warm neutral palette or to introduce a single deliberate color note. ## Sizing and Placement: Islands and Dining Tables The shade measures 11.8 inches (30 cm) in diameter, with an overall fixture height of 47.2 inches (120 cm) including the hanging cable. That diameter is a genuinely useful middle size — large enough to hold its own over a standard island, small enough that a pair or trio does not overwhelm a narrow room. Hanging height is where most installations go wrong. Design convention, not a code requirement, generally puts the bottom of a pendant roughly 30 to 36 inches above a kitchen island countertop, and about 30 to 34 inches above a dining tabletop. Treat those as starting points: if people stand and work at the island, favor the higher end; over a dining table, drop lower for intimacy as long as seated guests still have clear sightlines across the table. For width, a common rule of thumb is to keep total fixture width to roughly two- thirds of the island or table length, and to space multiple pendants evenly along the centerline. With an 11.8-inch shade, two pendants suit a shorter island and three suit a longer run — but the spacing math should follow your actual surface, not a formula pulled from a photo. [⌊Schoolhouse glass pendant light with beige metal hardware hanging above a kitchen island⌉⌊Schoolhouse glass pendant light with beige metal hardware hanging above a kitchen island⌉[ ## Specifications at a Glance Everything below comes from the manufacturer’s published product data. Where a number is not stated, this guide does not guess. | Spec | Detail | | Dimensions | Dia 11.8″ (30 cm) x H 47.2″ (120 cm) | | Materials | Metal, glass | | Body finishes | Beige, green | | Light source | LED bulb or Edison bulb | | Base type | E26 or E27 | | Recommended bulb | E26 T200 LED bulb (bulb not included) | | Voltage | AC 110-240V | | Mounting | Ceiling, hardwired | | Cable | 59″ (149.9 cm), adjustable hanging height | | Moisture rating | IP 20, damp-rated, indoor use | | Control | Compatible with common wall switch (not included) | | Certification | UL, ETL, CE, SAA listed; RoHS compliant; FCC certified | The 59-inch adjustable cable is the detail that gives you room to work with. It accommodates high ceilings and standard eight- to nine-foot ceilings alike, and it lets you dial in the drop to match the height guidance above rather than being locked into a fixed length. ## Choosing the Bulb: E26 T200 and Color Temperature The fixture takes an E26 or E27 base, and the manufacturer recommends an E26 T200 LED bulb or an Edison-style bulb. The bulb is not included, which is actually an advantage — it means you are not stuck with whatever comes in the box. For a glass schoolhouse shade, two specs do most of the work: * **Color temperature.** Around 2700K reads warm and suits dining rooms and bedrooms. Around 3000K is slightly crisper and is the safer pick over a kitchen island where you are prepping food. Anything at 4000K or above tends to look cold against a warm beige or green finish. * **Brightness.** A single pendant over a table is usually comfortable in the 400 to 800 lumen range. For task lighting over an island, plan on the higher end, and remember that multiple pendants on one switch multiply output. If you want the vintage look, an Edison-style filament bulb shows off the glass and reads as intentional rather than retro for its own sake. If you want maximum softness with no visible filament hot spot, a frosted or opal LED is the cleaner choice. Either way, confirm the bulb’s shape fits the shade’s internal clearance before buying a large-format globe. [⌊Close view of the schoolhouse pendant's rounded opal glass shade and metal fitting⌉⌊ Close view of the schoolhouse pendant's rounded opal glass shade and metal fitting⌉[ ## Beige or Green: Picking the Finish This is less a style question than a room question. **Beige** is the quieter option. It sits comfortably against white cabinets, oak, rattan, plaster walls, and most neutral schemes, and it disappears politely in a small kitchen where you do not want the fixture to be the first thing people notice. If you are hanging three pendants in a row, beige keeps the rhythm from feeling busy. **Green** is the choice when the room can carry a color moment. It pairs naturally with warm wood, brass accents, cream tile, and dark painted cabinetry, and it reads as a deliberate period reference. A single green pendant over a breakfast nook or as a pair over a butler’s pantry counter can anchor the whole scheme. Either finish works with the same bulb and the same hanging heights — the decision is aesthetic, not technical. ## Where It Fits and Where It Does Not The fixture is IP 20 and damp-rated for indoor use where it will not be exposed to moisture. That makes it a good fit for kitchen islands, dining rooms, breakfast nooks, entryways, bedrooms, and covered indoor spaces. It is not the right pick for bathrooms, laundry rooms, or other high-humidity areas where it could contact water. If you need a wet-location fixture, this is not it— choose something rated for that environment instead of stretching this one. Installation is hardwired and ceiling-mounted. On a flat ceiling it is straightforward for a qualified electrician. On a sloped ceiling it can work, but only with appropriate mounting hardware that is not included, and it is worth confirming your setup with a professional before ordering. [⌊Pair of schoolhouse glass pendants installed over a dining table in a warm neutral room⌉⌊Pair of schoolhouse glass pendants installed over a dining table in a warm neutral room⌉[ ## Frequently Asked Questions ### How big is this pendant light? The shade is 11.8 inches (30 cm) in diameter, and the overall fixture height is 47.2 inches (120 cm). The hanging cable is 59 inches (149.9 cm) and adjustable, so the installed drop depends on your ceiling height. ### What bulb should I use? An E26 or E27 base, with an E26 T200 LED bulb or an Edison bulb recommended by the manufacturer. The bulb is not included. For a dining room, 2700K is the natural choice; for a working island, 3000K is usually more practical. ### Can it go on a sloped ceiling? It is designed for ceiling mounting and hardwired installation. It can be installed on a sloped ceiling with appropriate mounting hardware, which is not included. Confirm with your electrician before ordering. ### Is it safe for a bathroom? No. The fixture is IP 20 and damp-rated for indoor use where it will not be exposed to moisture. Bathrooms, laundry rooms, and other high-humidity spaces are not recommended. ### How many should I hang over my island? Two pendants suit a shorter island and three suit a longer run, keeping total fixture width to roughly two-thirds of the island length and spacing them evenly on the centerline. Measure your actual surface rather than copying a layout from a photo. ## The Short Version If you want a pendant that softens a room instead of spotlighting it, the schoolhouse glass pendant light does that job with very few decisions to get wrong. Size it to the surface below, hang it 30 to 36 inches above a countertop or 30 to 34 inches above a table, choose 2700K for dining and 3000K for working islands, and pick beige for calm or green for character. [⌊Schoolhouse pendant light in a green finish shown in a styled interior setting⌉⌊ Schoolhouse pendant light in a green finish shown in a styled interior setting⌉[ Ready to specify it for your space? [View the Schoolhouse Glass Pendant Light](https://minihouzz.com/products/schoolhouse-glass-pendant-light-vintage-shade/) for current pricing and finish availability, or compare it against the rest of the [glass pendant lighting collection](https://minihouzz.com/products/schoolhouse-glass-pendant-light-vintage-shade/) if you are planning a multi-fixture run across an open plan. ## 3-Light Globe Pendant Light for Dining Room & Kitchen Island - Link: https://minihouzz.com/sculptural-3-light-globe-pendant-dining-room-guide/ - Published: 2026-11-10T09:31:22+08:00 - Author: Allen A three-globe pendant solves one specific problem: how to light a long dining table or kitchen island evenly without hanging a row of separate fixtures and cutting three ceiling holes. The Sculptural 3-Light Globe Pendant spans 38.5 inches (98 cm) in a single ceiling-mounted frame, with three white glass globes carried on a metal body in nickel or gold. If your table seats six to eight, or your island runs about five feet or longer, this is the size class worth considering. ## Design and materials: what you are actually buying The fixture is built from metal and glass — a metal frame in nickel or gold, matched to white glass globe shades. The proportions are deliberately horizontal: 38.5 inches wide against an 11-inch body height, which keeps the fixture visually low and airy rather than dominant. That ratio is what makes it read as Scandinavian rather than traditional. White glass matters more than it sounds. It diffuses the bulb so you see a soft glowing sphere instead of a hot spot, which is why globe pendants work over seating where people look up and sideways at the fixture all evening. The metal frame stays visible as a thin silhouette, so the fixture contributes a line to the room without adding visual weight. ## Sizing: table, island, and the numbers that matter Two measurements decide whether this fixture fits your room: the length of the surface below it, and the drop you can afford from your ceiling. ### Matching fixture width to surface length A pendant should cover roughly one half to two thirds of the table or island length it hangs over. At 38.5 inches wide, this fixture sits comfortably over: * A 72–84 inch (6–7 ft) dining table — the most natural pairing * A kitchen island 5 feet or longer * A round or oval table 48–60 inches across, centered on the long axis On a table shorter than about 60 inches, the fixture will overhang the ends and read as crowded. On an island longer than about 8 feet, one unit will look undersized— plan two, or accept that the ends stay in ambient light. ### Hanging height Working from the floor up is the reliable method. For a dining table, the bottom of the globes typically sits 30–36 inches above the tabletop — around 60–66 inches above the floor with a standard 30-inch table. Over a kitchen island, the same 30– 36 inches above the countertop keeps sightlines open while you work. The adjustable cable runs to a maximum of 59 inches (150 cm), and the body adds 11 inches. That means the maximum drop from ceiling to the bottom of the fixture is about 70 inches. In practice this covers flat ceilings up to roughly 11 feet while still hitting the 60–66 inch target. Taller ceilings, vaulted spaces, or a very high dining room will need a longer suspension than the included cable — confirm with support before ordering. [⌊Three white glass globe shades on a gold metal frame of the Sculptural pendant light⌉⌊Three white glass globe shades on a gold metal frame of the Sculptural pendant light⌉[ ## Installation and ceiling requirements This is a hardwired, ceiling-mounted fixture. It needs a ceiling junction box and a switched supply; it is not a plug-in design and it is not battery or remote operated. It is compatible with common wall switches, which are not included. Three practical checks before you book anyone: * **Ceiling type.** The fixture is designed for ceiling mounting. On a sloped or vaulted ceiling, have an electrician confirm alignment and canopy seating rather than assuming a flat-ceiling install will transfer. * **Box location.** The canopy centers on the existing box. If the box is off-center over the table, the fixture will be too — moving a box is a separate job. * **Moisture.** The rating is IP20, suitable for dry indoor locations only. Bathrooms, laundry rooms, and covered porches are out. Because the cable is field-adjustable, the electrician can set the final drop on site. Ask them to trim or coil the excess neatly inside the canopy rather than leaving slack above the frame. [⌊Sculptural three-globe pendant light installed above a dining table showing its adjustable drop⌉⌊Sculptural three-globe pendant light installed above a dining table showing its adjustable drop⌉[ ## Bulbs and light quality The fixture takes three bulbs on E26 or E27 bases and runs on AC 110–240V, so it works on US 120V circuits as well as 220–240V systems. It accepts LED or Edison- style bulbs. Colour temperature is the decision that changes the room most: * **2700K** — warm, slightly amber, the conventional choice for a dining room where the light is part of the atmosphere * **3000K** — cleaner white, better if the island doubles as prep space and you want food and surfaces to read accurately * **Mixing** — three separate sockets let you run one warmer bulb over a seating zone and cooler ones toward the work side, if the fixture hangs over a transition Use the same model and wattage in all three sockets. Mismatched bulbs in open globes are visible immediately as different glow temperatures. If dimming matters to you, check that your switch and bulbs are dimmer-compatible as a pair — the fixture itself is operated by a standard wall switch. ## Nickel or gold: choosing the finish Both finishes pair with the same white glass; the frame tone sets the mood. * **Nickel** reads cooler and more architectural. It sits naturally with stainless appliances, brushed hardware, grey stone, and cooler paint palettes, and it tends to disappear against white ceilings. * **Gold** reads warmer and more decorative. It picks up brass cabinet pulls, oak and walnut, and warm neutrals, and it becomes a visible design element rather than a neutral one. A simple rule: match the frame to the dominant metal already in the room — faucet, cabinet hardware, or table legs — rather than introducing a third tone. [⌊Close view of white glass globes and the metal frame detail on the three-light pendant⌉⌊Close view of white glass globes and the metal frame detail on the three- light pendant⌉[ ## Specifications | Dimensions | L 98 cm × H 28 cm / L 38.5 in (97.8 cm) × H 11 in (27.9 cm) | | Hanging cable | Adjustable, maximum 59 in (150 cm) | | Mounting | Ceiling, hardwired | | Control | Compatible with common wall switches (not included) | | Material | Metal, glass | | Light source | LED or Edison bulb | | Base type | E26 or E27 | | Voltage | AC 110–240V | | Moisture resistance | IP20 — dry indoor locations | | Body finishes | Nickel, gold | | Shade finish | White | | Certifications | UL, ETL, CE, SAA listed; RoHS compliant; FCC certified | ## Before you order: a short checklist 1. Measure the table or island length — you want 38.5 inches to be roughly half to two thirds of it. 2. Measure ceiling height and subtract: cable (up to 59 in) + 11 in body must land the globes 30–36 in above the surface. 3. Confirm the junction box is centered on the surface, not on the room. 4. Decide 2700K or 3000K before you buy bulbs, and buy three of the same. 5. Confirm the room is dry indoor space — not a bathroom or covered porch. [⌊Sculptural 3-light globe pendant light hanging over a kitchen island in a bright modern interior⌉⌊Sculptural 3-light globe pendant light hanging over a kitchen island in a bright modern interior⌉[ ## FAQ ### How wide is this pendant, and what size table does it suit? It measures 98 cm (38.5 in) wide and 28 cm (11 in) tall. It pairs best with dining tables of about 72–84 inches or islands of 5 feet and longer, where the fixture covers roughly half to two thirds of the surface length. ### How low should it hang over a dining table or island? Aim for 30–36 inches from the bottom of the globes to the tabletop or countertop. The adjustable cable reaches 59 inches (150 cm) and the body adds 11 inches, so total drop maxes out around 70 inches — enough for flat ceilings up to roughly 11 feet at a comfortable hanging height. ### What bulbs does it take? Three E26 or E27 base bulbs, LED or Edison style, on AC 110–240V. Use three of the same model so the globes glow evenly. 2700K suits dining; 3000K suits an island that doubles as workspace. ### Can it go in a bathroom or on a covered porch? No. The fixture is IP20 rated, which is dry indoor use only. Bathrooms, laundry rooms, and other high-moisture areas are not suitable. ### Can it be installed on a sloped ceiling? It is designed for ceiling mounting and hardwired installation. For sloped ceilings, have a professional electrician confirm the canopy seats correctly and the fixture hangs plumb before installation. Three globes, one ceiling point, 38.5 inches of even light over the table — that is the whole idea. [See the Sculptural 3-Light Globe Pendant in nickel or gold](https://minihouzz.com/products/sculptural-3-light-globe-pendant-light-dining-kitchen-island/), and check the current finishes and shipping options on the product page. ## Squiggle Table Lamp Review: Pleated Shade Styling Guide - Link: https://minihouzz.com/squiggle-table-lamp-pleated-shade-styling-guide/ - Published: 2026-11-09T20:31:38+08:00 - Author: Allen The Squiggle table lamp is a 23.6-inch (60 cm) accent lamp built around two ideas: a pleated fabric shade that softens light, and a curved black metal stem that reads as sculpture even when the lamp is switched off. It uses an E14 base bulb, runs on AC 110–240V, and is damp-rated (IP20) for indoor use. If you want warm, diffused light on a bedside table, a hallway console, or the end of a sofa — without a lamp that shouts for attention — this is the shape most people are looking for. Below is what the piece actually is, where it works best, how to choose the bulb and shade color, and the small placement details that decide whether an accent lamp looks considered or crowded. ## What the Squiggle lamp is — and what it is not The lamp measures **17 inches (43.2 cm) in diameter and 23.6 inches (59.9 cm) tall**. That is a generous shade for a table lamp: wide enough to throw a broad pool of light across a nightstand or console, compact enough to sit on a 16-inch-deep surface without hanging over the edge. The body is black metal. The shade is pleated fabric, offered in beige, white, dark green, or black. A pleated shade does two things a smooth drum shade cannot: the folds break up the bulb’s hot spot so the light reads softer, and the vertical lines add texture that catches daylight during the day. It is _not_ a task lamp. There is no adjustable arm, no directed beam, and no dimmer in the base — the on/off control is an inline push-button switch on the 59.1-inch( 150.1 cm) power cord. Treat it as ambient and accent lighting, and it does its job well. ### Materials and build, plainly stated * **Body:** metal, black finish * **Shade:** pleated fabric — beige, white, dark green, or black * **Dimensions:** ∅ 17″ (43.2 cm) × H 23.6″ (59.9 cm) * **Base type:** E14 * **Voltage:** AC 110–240V * **Moisture rating:** IP20, damp-rated, indoor use only * **Control:** inline on/off push-button switch on the cord * **Cord:** 59.1″ (150.1 cm) with plug * **Certification:** UL, ETL, CE, SAA listed [⌊Squiggle table lamp with pleated fabric shade and curved black metal stem on a side table⌉⌊Squiggle table lamp with pleated fabric shade and curved black metal stem on a side table⌉[ ## Where the Squiggle lamp works best The curved stem leans slightly, so the shade sits off-centre from the base. That asymmetry is the point — it gives the lamp movement — but it also means the lamp wants a little breathing room. Give it roughly 6–8 inches of clear space on the leaning side so the curve reads as intentional rather than bumped. ### Bedside At 23.6 inches tall, the lamp suits a nightstand that is 24–28 inches high: the shade lands near seated eye level, so the light falls on your book or phone rather than into your eyes. If your nightstand is lower than 22 inches, the shade will sit above eye level when you are lying down and may feel bright at the edges — in that case angle the lamp slightly toward the wall and use a lower-output bulb. Because the switch is inline on the cord rather than on the base, plan the cord route before you commit. A nightstand pushed against the wall hides the cord cleanly; a floating nightstand leaves 59.1 inches of cord to manage, which is enough to reach a nearby outlet along the baseboard. ### Hallway or entry console A console 30–34 inches high is the sweet spot here: the lamp tops out around chest height, so a visitor sees the sculptural stem first and the glow second. Pair it with a shallow tray and one object — the pleats already carry visual texture, so a busy console fights it. ### Living room side table Next to a sofa, the wide shade works as a soft secondary light source for evening conversation, especially in a corner where a floor lamp would block traffic. Keep it out of the direct line of a television screen; a 43 cm shade at eye level will reflect. [⌊Pleated fabric shade detail on the Squiggle table lamp in a living room setting⌉⌊ Pleated fabric shade detail on the Squiggle table lamp in a living room setting⌉[ ## Choosing the bulb and the light quality The lamp takes an E14 bulb, and it is compatible with LED or Edison-style bulbs. The bulb is not included, so this is the one decision that most changes how the lamp feels. * **For a warm living-room glow:** a 2700K LED in the 4–6W range gives roughly the output of a 40–60W incandescent while keeping heat low under a fabric shade. * **For reading at a bedside:** step up to 6–8W at 2700–3000K. Avoid anything above 3000K in a bedroom — the cooler tones work against the cocoon feel the pleats create. * **For a deco, filament look:** a low-wattage Edison-style E14 bulb shows off the shade texture, but check the bulb’s length against the shade’s internal clearance before ordering. One practical note on fabric shades: heat is the enemy, not brightness. A modern LED runs cool enough that the pleats stay crisp for years; an oversized incandescent can fade and stiffen the fabric. If you want maximum output, choose an LED. ## Shade color: how each option changes the room The body stays black in every configuration, so the shade color is doing the styling work. Here is how the four options read in a typical room. | Shade color | Light effect | Best fit | | Beige | Warmest, most diffused — softens the bulb noticeably | Bedrooms, neutral and wood-toned rooms, layered textiles | | White | Brightest and cleanest; keeps the contrast with the black stem sharp | Modern and Nordic interiors, hallways, white-walled rooms | | Dark green | Moodier; the shade glows from within rather than lighting the room | Reading corners, vintage and eclectic schemes, dark walls | | Black | Most sculptural — the lamp reads as a silhouette | Monochrome and industrial rooms, desks and consoles as a statement | If you are unsure, beige is the safe choice in a room with warm woods and textiles; white is the safe choice in a room with cool or neutral finishes. Dark green and black are the confident picks — they look deliberate in photos and quiet in person. [⌊Squiggle table lamp shown with an Edison-style bulb glowing through a pleated shade⌉⌊Squiggle table lamp shown with an Edison-style bulb glowing through a pleated shade⌉[ ## Placement checklist before you buy 1. **Measure the surface depth.** The shade is 17 inches across; a table shallower than 16 inches will look top-heavy. 2. **Check the outlet distance.** The cord is 59.1 inches. Anything further needs an extension cord, and a visible extension cord undoes the styling. 3. **Confirm the switch is reachable.** The inline switch sits on the cord, so it needs to land somewhere you can reach without crawling — usually near the table edge or on the floor beside it. 4. **Decide the bulb before the lamp arrives.** E14, LED or Edison-style, warm white. 5. **Keep it indoors.** IP20 and damp-rated means it handles humidity but not direct water — a covered porch is fine, a rain-exposed patio is not. Ready to see the current price and shade options? [View the Squiggle table lamp at MiniHouzz](https://minihouzz.com/products/squiggle-table-lamp-pleated-fabric-shade-black-metal-stem/). ## Frequently asked questions ### What bulb does the Squiggle table lamp use? An E14 base bulb — LED or Edison-style both work. It runs on AC 110–240V, so it suits US and European outlets without a converter. The bulb is not included. ### Is it bright enough to read by? The shade is wide and diffused, which spreads light rather than concentrating it. For close reading, choose a 6–8W warm-white LED in the E14 base; for ambient glow, 4–6W is plenty. ### Can I use it in a bathroom? It is damp-rated (IP20) and intended for indoor use, so a bathroom or covered porch is acceptable as long as it is not exposed to direct water contact. It is not a wet-rated fixture. ### Does it have a dimmer? No. Control is an inline on/off push-button switch on the 59.1-inch power cord. If you want dimming, use a smart E14 bulb or a plug-in dimmer. ### How do I clean a pleated fabric shade? Dust with a soft brush or a vacuum on the lowest setting with a brush attachment, working along the pleat direction. Avoid wet cloths, which can leave water marks on fabric. [⌊Squiggle table lamp styled on a hallway console with a curved black stem⌉⌊Squiggle table lamp styled on a hallway console with a curved black stem⌉[ ## The short version Buy the Squiggle table lamp if you want a warm, sculptural accent light for a bedside table, hallway console, or sofa-side surface, and you are happy with an inline switch and a bulb you choose yourself. Skip it if you need directed task light or built- in dimming. Choose beige for warm rooms, white for cool rooms, dark green or black when you want the lamp to be the statement. [Check availability and shade colors at MiniHouzz →](https://minihouzz.com/products/squiggle-table-lamp-pleated-fabric-shade-black-metal-stem/)